|
|
|
|
|
|
|
|
|
|
|
|
|
|
Botron B7500 Blue Ergo One Heel Grounder 1 Meg. The cup of the Blue Ergo One Heel Grounder is a symmetrical design that can be reversed when put on. It also features Dual layer Rubber with a non-marking inside and conductive rubber outside. As with all of Botron's heel grounders, the Ergo One has a 1.5" wide rubber, securing both at the back and underneath the heel. It's 7.5" length rubber provides enough cup volume to fit comfortably on those with larger shoe sizes. Available in 1 and 2 Meg Ohm resistors or no resistor at all.
|
Botron B7503 Black Ergo One Heel Grounder 1 Meg. The cup of the Black Ergo One Heel Grounder is a symmetrical design that can be reversed when put on. It also features Dual layer Rubber with a non-marking inside and conductive rubber outside. As with all of Botron's heel grounders, the Ergo One has a 1.5" wide rubber, securing both at the back and underneath the heel. It's 7.5" length rubber provides enough cup volume to fit comfortably on those with larger shoe sizes. Available in 1 and 2 Meg Ohm resistors or no resistor at all.
|
Transforming Technologies HG1390S Hi-Vis Yellow Heel Grounder is
constructed from durable materials and features a classic hi-visibility
yellow/green hook & loop closure with an elastic insert to maximize
fit and comfort.
HG1390S heel grounders connect the person wearing them to ground via a
proper floor mat or flooring material. Wearing the conductive ribbon
inside the shoe or sock assures proper electrical contact with the user.
A buried 1 meg ohm resistor is standard. HG1390S heel grounders are worn
on both feet to provide consistent grounding while in motion.****Sold in multiples of 10****
Meets or exceeds requirements of ANSI ESD-S20.20.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Transforming Technologies HG1360B Blue Heel Grounder features a stretch hook and loop closure strap to maximize fit and
comfort. The cup of the HG1360B Heel Grounder is a symmetrical design
that can be reversed when put on to double the lifespan.
HG1360B heel grounders connect the person wearing them to ground via a
proper floor mat or flooring material. Wearing the conductive ribbon
inside the shoe or sock assures proper electrical contact with the user.
The ribbon connects to the conductive rubber to complete the circuit
between the operator and the static controlled floor or mat.
A buried 1 meg ohm resistor ensures safety and is standard. HG1360B heel
grounders must be worn on both feet to provide consistent grounding
while in motion.****Sold in multiples of 10****
Meets or exceeds requirements of ANSI ESD-S20.20.
|
Transforming Technologies HG1360R Red Heel Grounder features a stretch hook and loop closure strap to maximize fit and
comfort. The cup of the HG1360R Heel Grounder is a symmetrical design
that can be reversed when put on to double the lifespan.
HG1360R heel grounders connect the person wearing them to ground via a
proper floor mat or flooring material. Wearing the conductive ribbon
inside the shoe or sock assures proper electrical contact with the user.
The ribbon connects to the conductive rubber to complete the circuit
between the operator and the static controlled floor or mat.
A buried 1 meg ohm resistor ensures safety and is standard. HG1360R heel
grounders must be worn on both feet to provide consistent grounding
while in motion.****Sold in multiples of 10****
Meets or exceeds requirements of ANSI ESD-S20.20.
|
Transforming Technologies HG1360 Black Heel Grounder features a stretch hook and loop closure strap to maximize fit and
comfort. The cup of the HG1360 Heel Grounder is a symmetrical design
that can be reversed when put on to double the lifespan.
HG1360 heel grounders connect the person wearing them to ground via a
proper floor mat or flooring material. Wearing the conductive ribbon
inside the shoe or sock assures proper electrical contact with the user.
The ribbon connects to the conductive rubber to complete the circuit
between the operator and the static controlled floor or mat.
A buried 1 meg ohm resistor ensures safety and is standard. HG1360 heel
grounders must be worn on both feet to provide consistent grounding
while in motion. ****Sold in multiples of 10****
Meets or exceeds requirements of ANSI ESD-S20.20.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Botron B7522 Black Ergo One Toe Grounder 1 Meg. The cup of this toe grounder is a 5" long piece of dual layer rubber, with a non-marking interior and a conductive outer layer. As with all of Botron's toe grounders, the Ergo One has a 1.5" wide cup. The heel strap measures .75" wide by 12" in length and fastens with a snap lock mechanism. Available in 1 and 2 Meg Ohm resistors or no resistor at all.
|
Botron B7571 Non Marking Heel Grounder No Resistor. The cup of the Ergo One Heel Grounder is a symmetrical design that can be reversed when put on. It also features three layer rubber, with a non-marking interior/exterior and a conductive rubber inner layer. As will all of Botron's heel grounders, the Ergo One series has a 1.5" wide rubber, securing both at the back and underneath the heel.
|
Transforming Technologies HG1360NM-2 Non-Marking Heel Grounder is constructed from a non-marking and highly dissipative
three layer rubber. The reversible 1.5inch wide rubber cup, secures both
at the back and underneath the heel. Its 7.5inch length rubber provides
enough cup volume to fit comfortably on those with larger shoe sizes.
The 7inch stretch hook and loop enclosure ensures a comfort fit.
These heel grounders connect the person wearing them to ground via a
proper floor mat or flooring material. Wearing the conductive ribbon
inside the shoe or sock assures proper electrical contact with the user.
A buried 1 meg ohm resistor is standard. Heel grounders are worn on
both feet to provide consistent grounding while in motion. ****Sold in multiples of 10**** A buried 1meg resistor is built into the strap for safety and to comply with ANSI ESD S2020.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Desco 17200 Foot Grounder w/1 Meg Resistor has a hook and loop fastening system. Size adjustable material expands to fit most shoe sizes comfortably and flex during walking. Reinforced material prevents tearing-increasing the service life of foot grounder.
|
Botron B7505 Full Coverage Sole Grounders are designed to provide maximum surface coverage. The benefit of wearing a sole grounder is always maintaining contact with the floor surface whether on heel or toe. Dual fastening D-ring system with two .75" wide by 8" length stretch hook and loop straps on front and rear.
|
Transforming Technologies ESD Socks are used in combination of ESD flooring and footwear and can be an effective way to ground personnel to control electrostatic discharges when using a wrist strap is not practical. For this system to be effective, the ESD flooring and footwear must have a low enough resistance to allow the voltage from the operator to flow to ground. Available in Small, Medium, and Large sizes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Botron B750368 Disposable Heel Grounder 100/PK is the ideal solution for visitors and temporary personnel on the work floor of static controlled environments. It is a non-woven polyester with a wide conductive fiber strip. It easily adheres to the sole of the shoe and tucks conveniently into footwear. High visibility yellow. Pressure sensitive adhesive.
|
Estatec ESH-B123 EstaShoe, 2 Meg Resistance, Black Sole, Adjustable Strap. White or Black available. Many sizes to choose from A great footwear option that is used for grounding personnel on conductive or dissipative surfaces comfortably. Ergonomic. Excellent grounding conductor. Sold per pair. Men and Women's sizes available. Specify size and color when ordering.
|
Desco 19350
TouchTester-North America is an "on demand" wrist strap tester that also
functions as a common-point ground for two wrist straps and a mat. When
the wearer of a wrist strap touches the metallic surface of the Touch
Tester, a path for current flow is completed from the wearer's skin,
through the wrist strap, to the metallic surface to ground.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Desco 19239 Mini Monitor-North America continuously
monitors the path-to-ground integrity of one operator and one ESD
worksurface. Alarms when the operator unintentionally disconnects from
the monitor or the connection between the banana plug and monitor's jack
is intermittent. Single workstation continuous monitor system.
|
Desco 19651 Multi-Mount Continuous Monitor. Continuously
monitors the path-to-ground integrity of one operator and one ESD
worksurface. Alarms when the operator unintentionally disconnects from
the monitor or the connection between the banana plug and the monitor's
jack is intermittent.
|
Desco 19330 Full-Time Monitor with North American Power Cord continuously
monitors the path-to-ground integrity of one operator, one ESD
worksurface, and the electrical ground used to by the monitor. Single workstation continuous monitor. Provides a verified ground point for mats, carts, tools, and other items.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Botron B8506 Wall mounted test station can be permanently mounted to the wall. Tests coil cords, wrist straps, and footwear. 750k-100 megohms. 9V battery.
|
Desco 19280 Tester, Combo Wrist Strap and Foot Grounder tester verifies the functionality
or personnel grounding devices (wrist straps, foot grounders, ESD
shoes, and ESD smocks). Three independent tests are preformed
simultaneously on wrist straps and each foot. Green lights indicate a
pass condition. Red and yellow lights plus an audible alarm indicate when the wrist strap and/or footwear have failed. New durable stainless steel test button. Tester only.
|
Desco 19668 Zero Volt Monitor continuously
monitors the path-to-ground integrity of two operators and two ESD
worksurfaces independently. Dual station continuous monitor for 2
operators and 2 workstations. Places dual test signals onto each of the
dual-wire wrist strap's conductors to negate finger-tip voltage and the
risk of electrical overstress for the handling of sensitive components.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Desco 19282 Tester, Combo Wrist Strap and Foot Ground, with Stand verifies the functionality
or personnel grounding devices (wrist straps, foot grounders, ESD
shoes, and ESD smocks). Three independent tests are preformed
simultaneously on wrist straps and each foot. Green lights indicate a
pass condition. Red and yellow lights plus an audible alarm indicate when the wrist strap and/or footwear have failed. New durable stainless steel test button.
|
Desco 19270 Combo Tester X3, with Dual Foot Plate verifies the functionality
or personnel grounding devices (wrist straps, foot grounders, ESD
shoes, and ESD smocks. Three independent tests are preformed
simultaneously on wrist straps and each foot. Green lights indicate a
pass condition. Red and yellow lights plus an audible alarm indicate when the wrist strap and/or footwear have failed.
|
Desco 19271 Combo Tester X3, with Stand Plate verifies the functionality
or personnel grounding devices (wrist straps, foot grounders, ESD
shoes, and ESD smocks). Three independent tests are preformed
simultaneously on wrist straps and each foot. Green lights indicate a
pass condition. Red and yellow lights plus an audible alarm indicate when the wrist strap and/or footwear have failed.
|
|
|
