|
|
|
|
|
|
|
|
|
|
|
|
|
Botron's B88035 Elite Complete HID Tester with Integrated S.S. Turnstile,
Footplate, cables & basic software
ELite ESD Test equipment is the most advanced the industry has to offer.
The Elite is a all in one turnkey solution designed from years of
R&D to fit the needs of every customer. Featuring data logging
capabilities, VTR technology, failure prevention mode, on board storage,
net workable, expandability and easy integration.
|
Botron's B88015 Elite Complete Barcode Tester with Integrated S.S. Turnstile,
Footplate, cables & basic software Elite ESD Test equipment is the most advanced the industry has to offer.
The Elite is a all in one turnkey solution designed from years of
R&D to fit the needs of every customer. Featuring data logging
capabilities, VTR technology, failure prevention mode, on board storage,
net workable, expandability and easy integration.
|
Transforming Technologies 7100.3000.MK Warmbier Metriso 3000 ESD Audit Kit measures a wide range of values: low resistance from 1KilaOhm to 1.2 TeraOhm. The kit comes with two 5lb disc probes and has an integrated temperature and humidity gauge. Measuring voltage can be set between 10-500V and also varied if desired.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Botron's B88030 Elite Complete HID Tester Test Station with Footplate,
Test Stand, cables & basic software (test station)
Elite ESD Test equipment is the most advanced the industry has to offer.
The ELITE is a all in one turnkey solution designed from years of
R&D to fit the needs of every customer. Featuring data logging
capabilities, VTR technology, failure prevention mode, on board storage,
net workable, expandability and easy integration.
|
Botron's B88010 Elite Complete Barcode Test Station. ELITE ESD Test equipment is the most advanced
the industry has to offer. The ELITE is a all in one turnkey solution
designed from years of R&D to fit the needs of every customer.
Featuring data logging capabilities, VTR technology, failure prevention
mode, on board storage, net workable, expandability and easy integration.
|
Botron B88005 Elite Complete Barcode Tester Wall Station with footplate, cables & basic software included (wall mountable). Elite ESD Test Equipment is the most advanced the industry has to offer. The Elite is an all in one turnkey solution designed from years of R&D to fit the needs every customer. Featuring data logging capabilities, VTR technology, failure prevention mode, on board storage, net workable, expandability, and easy intergration.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Botron's B88025 Elite Complete HID Tester with Footplate, cables &
basic software included (wall mountable)
Elite ESD Test equipment is the most advanced the industry has to offer.
The Elite is a all in one turnkey solution designed from years of
R&D to fit the needs of every customer. Featuring data logging
capabilities, VTR technology, failure prevention mode, on board storage,
networkable, expandability and easy integration.
|
Botron's B88000 Elite Complete Barcode Tester only. Elite ESD test equipment is the most advanced the industry has to offer. The Elite is an all in one turnkey solution designed for years of R&D to fit the needs of every customer. Featuring data logging capabilities, VTR technology, failure prevention mode, on board storage, net workable, expandability, and easy intergration.
|
Botron's B88020 Elite Complete ESD Test equipment is the most advanced the industry has to offer.
The Elite is a all in one turnkey solution designed from years of
R&D to fit the needs of every customer. Featuring data logging
capabilities, VTR technology, failure prevention mode, on board storage,
net workable, expandability and easy integration.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Transforming Technologies 7100.EFMS51 Plus Warmbier Electrostatic Field Meter is a handheld meter to quickly detect and measure electrostatic charge accumulation on surfaces.
|
Botron B8572 ESD Digital/Analog Test Kit. The B8572 digital and analog surface test kit is an easy to read large megohm tester. The most complete and accurate auditing tester on the market. Tests not only flooring and work surfaces, but grounds, garments, continuity and Ohms. Test voltages range from 10v-500v. The large LCD displays not only real time test results, but also test voltage. Meets ANSI/ESD standards. It comes with probes and 2-5lb weights packaged in a portable case.
|
Pro-Line BIB2 Bench In A Box-Standard Laminate Workbench Complete 30" x 60". Includes a Plastic
Laminate work surface, footrest, 6" drawer with a lock, support
uprights, 12 outlet power supply, overhead adjustable light, 12"x60"
Laminate shelf, and bin holder (bins not included). Easy to assemble.
Weights 260lbs.Made in the USA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Foamtec HT1950 3" ESD Safe Semi-Flexible Micro Spear Tip UltraSolve Swab 12500 Swabs Tip are designed to protect ESD
sensitive components from electrostatic
discharge. Three types of tip materials are thermally bonded to a static
dissipative handle designed to minimize tribocharging when used with
cleanroom gloves.ESD Safe Cleanroom Swabs enable ESD safe swabbing of
small static sensitive components where ESD events must be controlled.
1900 Series Static Dissipative Foam Swabs - Swab tips are constructed
with an open cell static dissipative UltraSOLV polyurethane foam,
thermally bonded to a static dissipative polyproylene handle for maximum
protection against electrostatic discharge events. UltraSOLV foam, in
addition to being static dissipative, is extremely low in tribocharging. 12500 swabs per case.
|
Foamtec HT1932 3" ESD Safe Rigid Small Round Tip UltraSolve Swab 12500 Swabs Tip are designed to protect ESD
sensitive components from electrostatic
discharge. Three types of tip materials are thermally bonded to a static
dissipative handle designed to minimize tribocharging when used with
cleanroom gloves.ESD Safe Cleanroom Swabs enable ESD safe swabbing of
small static sensitive components where ESD events must be controlled.
1900 Series Static Dissipative Foam Swabs - Swab tips are constructed
with an open cell static dissipative UltraSOLV polyurethane foam,
thermally bonded to a static dissipative polyproylene handle for maximum
protection against electrostatic discharge events. UltraSOLV foam, in
addition to being static dissipative, is extremely low in tribocharging. 12500 swabs per case.
|
Foamtec HT1914 3" ESD Safe Rigid Mini Spear Tip UltraSolve Swab 12500 Swabs Tip are designed to protect ESD
sensitive components from electrostatic
discharge. Three types of tip materials are thermally bonded to a static
dissipative handle designed to minimize tribocharging when used with
cleanroom gloves.ESD Safe Cleanroom Swabs enable ESD safe swabbing of
small static sensitive components where ESD events must be controlled.
1900 Series Static Dissipative Foam Swabs - Swab tips are constructed
with an open cell static dissipative UltraSOLV polyurethane foam,
thermally bonded to a static dissipative polyproylene handle for maximum
protection against electrostatic discharge events. UltraSOLV foam, in
addition to being static dissipative, is extremely low in tribocharging. 12500 swabs per case.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pro-Line BIB1 Bench In A Box-Standard Laminate Workbench Complete 30" x 60". Includes a Plastic Laminate work surface, footrest, 6" drawer with a lock, support uprights, 12 outlet power supply, overhead adjustable light, 12"x60" Laminate shelf, and bin holder (bins not included). Easy to assemble. Weights 260lbs.Made in the USA.
|
Botron B54360 Disk Drive Roll 3/8" Thick 3'x60' Disk Drive is made of soft vinyl foam material. Provides comfort and can protect parts susceptible to physical shock and damage. Can be used on carts, benches, inside trays, and shelves to provide a static safe work area. No grounding is needed when used over a hard dissipative surface. Easy to cut.
|
Botron B543060 Disk Drive Roll 3/8" Thick 30"x60' Disk Drive is made of soft vinyl foam material. Provides comfort and can protect parts susceptible to physical shock and damage. Can be used on carts, benches, inside trays, and shelves to provide a static safe work area. No grounding is needed when used over a hard dissipative surface. Easy to cut.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Botron Humidity and Temperature Audit Kit measures not only temp and humidity, but resistance as well. Test at 10 or 100 volts. Includes 5lb weights for more accurate results.This unit is used for measuring work surfaces and floors. It's easy to read LCD displays test results in scientific notation ranging from 10e3 @ 10v to 10e12 @ 100v, It also records relative humidity and temperature which are important for accurate data recording and auditing.
|
Botron's B31450 Dissipative Three Layer Rubber Roll 4'x50' .060 thick. Dissipative top layer 10e8. Conductive bottom layer 10e4. It is reversible and will not burn and supports the use of constant monitors. 50' long rolls are available in 2', 30", 3', and 4' wide widths. Blue, Gray, and Lead Free Green.
|
Transforming Technologies BFN803 Three Fan Overhead Ionizer with LED Task
Light has an excellent static eliminating performance over a 2' x 4'
coverage area. This blower produces a powerful air flow, rich in
positive and negative ions that quickly neutralize static charges.
Includes energy efficient LED lights to help alleviate eye strain,
headaches, and even has a positive effect on mood-all while saving on
energy costs. An integrated emitter point cleaner, removable front and
rear fan guards with safety switches combine to make this unit user
friendly. Comes factory calibrated with a calibration cert.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Transforming Technologies BFN8412 Extended Coverage Benchtop Ionizing Blower With Heater is designed to protect most static sensitive devices. Uses AC Ionizing Technology which makes the ionizer balanced and reliable with minimal maintenance. Features a built in emitter point cleaner and a heater that can be turned on at anytime for user comfort. Excellent balance and stability for secure workstation protection.
|
Botron B48614SF Ionizing Air Snake is designed to neutralize static charge and eliminate contaminates. It features a self contained HV power unit, foot petal, and adjustable neck.
|
Botron's B61450 Dissipative Two Layer Rubber Roll 4'x50' .060 thick. Dissipative top layer 10e8. Conductive bottom layer 10e4. It is reversible and will not burn and supports the use of constant monitors. 50' long rolls are available in 2', 30", 3', and 4' wide widths. Blue, Gray, and Lead Free Green.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Botron B486103 THREE FAN, HIGH FREQUENCY OVER HEAD IONIZERS 26"x5.7"x2.5" As with all of Botrons ionization units the B486102 is designed to neutralize electrostatic charge in personal bench top environments, sensitive materials assembly, packaging, clean room and laboratories. The unit can be mounted but is not limited to the underside of shelving, ceilings and walls.
|
Transforming Technologies BFNG10 is a high-performance ionizing gun
perfect for a wide variety of industrial applications. This ionizing air
gun provides excellent balance and rapid charge decay for secure ESD
work station protection. A single intergrated Air/Power cable eliminates bulky high voltage cables and strain relief protects cables from damage.
|
Botron B496203 Intelligent Three Fan Overhead Ionizer is internet ready and monitored with a built in LED screen. This ionizer is both incredibly accurate and effective at eliminating static charges. Built in lights. Self cleaning.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Botron B8775G Gray StatCare Expoy Concrete Finish is designed to dissipate static charges and stop static generation. It will provide a durable, UL approved, slip resistant finish that can be applied on sealed concrete. It's water based epoxy/acrylate formula is extremely resistant to chemicals and solvents. This ESD concrete finish is superior and will outlast latex and urethane floor paints. Coverage of 300-400sq. feet per gallon. Three coats is recommended.
|
Botron's B31350 Dissipative Three Layer Rubber Roll 3'x50' .060 thick. Dissipative top layer 10e8. Conductive bottom layer 10e4. It is reversible and will not burn and supports the use of constant monitors. 50' long rolls are available in 2', 30", 3', and 4' wide widths. Blue, Gray, and Lead Free Green.
|
Botron's B65440 Dissipative Two Layer Rubber Roll 4'x40' .080 thick. Dissipative top layer 10e8. Conductive bottom layer 10e4. It is reversible and will not burn and supports the use of constant monitors. 50' long rolls are available in 2', 30", 3', and 4' wide widths. Blue, Gray, and Lead Free Green.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Botron B8771G Gray Expoy Concrete Finish is designed to dissipate static charges and stop static generation. It will provide a durable, UL approved, slip resistant finish that can be applied on sealed concrete. It's water based epoxy/acrylate formula is extremely resistant to chemicals and solvents. This ESD concrete finish is superior and will outlast latex and urethane floor paints. Coverage of 300-400sq. feet per gallon. Three coats is recommended.
|
Botron's B313050 Dissipative Three Layer Rubber Roll 30"x50' .060 thick. Dissipative top layer 10e8. Conductive bottom layer 10e4. It is reversible and will not burn and supports the use of constant monitors. 50' long rolls are available in 2', 30", 3', and 4' wide widths. Blue, Gray, and Lead Free Green.
|
Botron B496202 Intelligent Two Fan Overhead Ionizer is internet ready and monitored with a built in LED screen. Built in lights. This ionizer is both incredibly accurate and effective at eliminating static charges. Software is available. Self cleaning.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Botron's B61350 Dissipative Two Layer Rubber Roll 3'x50' .060 thick. Dissipative top layer 10e8. Conductive bottom layer 10e4. It is reversible and will not burn and supports the use of constant monitors. 50' long rolls are available in 2', 30", 3', and 4' wide widths. Blue, Gray, and Lead Free Green.
|
Botron B486102 TWO FAN, HIGH FREQUENCY OVER HEAD IONIZERS 26"x5.7"x2.5" As with all of Botron's ionization units the B486102 is designed to neutralize electrostatic charge in personal bench top environments, sensitive materials assembly, packaging, clean room and laboratories. The unit can be mounted but is not limited to the underside of shelving, ceilings and walls.
|
Transforming Technologies BFN802 Two Fan Overhead Ionizer with LED Task
Light has an excellent static eliminating performance over a 2' x 3'
coverage area. This blower produces a powerful air flow, rich in
positive and negative ions that quickly neutralize static charges.
Includes energy efficient LED lights to help alleviate eye strain,
headaches, and even has a positive effect on mood-all while saving on
energy costs. An integrated emitter point cleaner, removable front and
rear fan guards with safety switches combine to make this unit user
friendly. Comes factory calibrated with a calibration cert.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Botron B8562Kit is used for, but not limited to, measuring and testing work surfaces and flooring. The testers' easy to read LEDs illuminate according to test results. This quick test surface meter is light and portable and are ideal for on-the-spot testing of RTT and RTG.
|
Botron B486150 Dual Fan Ionizer is a high frequency unit that provides both reliability and performance.Standard equipment comes built with an on and off switch along with an auto ion balance and abnormal HV monitoring system.
|
SCS 770068 WS Aware Dual-Wire Monitor with Big Brother Remotes and Ethernet Output is designed with digital signal processing technology for true continuous monitoring (versus pulsed or intermittent) of wrist strap functionality (path-to-ground and presence of 1 megohm resistor) and operator safety according to accepted industry standards without capacitance variations from personnel or environment. This monitor is a dual workstation monitor for operators, ESD worksurfaces and metal tools. Optional Power Relay (770069)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Botron B92900 Elite Sentinel Continuous Monitoring System Dual Operator. Total path to ground measurement is the apex of wrist strap constant monitoring. In contrast, resistance loop monitoring ignores the most vital part of and ESD program, total resistance of a system. The Sentinel V2 measures the ESD device and the human body down a 2 connector path to ground. This circuit differs from resistance loop monitoring in which the measurement is calculated with device resistors in a parallel path, halving the resistance for a truer more accurate reading.
|
Botron's B65340 Dissipative Two Layer Rubber Roll 3'x40' .080 thick. Dissipative top layer 10e8. Conductive bottom layer 10e4. It is reversible and will not burn and supports the use of constant monitors. 50' long rolls are available in 2', 30", 3', and 4' wide widths. Blue, Gray, and Lead Free Green.
|
Botron's B613050 Dissipative Two Layer Rubber Roll 30"x50' .060 thick. Dissipative top layer 10e8. Conductive bottom layer 10e4. It is reversible and will not burn and supports the use of constant monitors. 50' long rolls are available in 2', 30", 3', and 4' wide widths. Blue, Gray, and Lead Free Green.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Botron B8525 Deluxe Dual Test Station features a sleek design adjustable black frame and molded foot plate. Wires simply slip into the frame and are hidden and kept safe from snagging and interference. With the new dual tester, personnel can verify wrist straps and any type of footwear ranging from heel grounders to conductive shoes.
|
Botron's B31250 Dissipative Three Layer Rubber Roll 2'x50' .060 thick. Dissipative top layer 10e8. Conductive bottom layer 10e4. It is reversible and will not burn and supports the use of constant monitors. 50' long rolls are available in 2', 30", 3', and 4' wide widths. Blue, Gray, and Lead Free Green.
|
SCS 770067 WS Aware Dual-Wire Monitor with Standard Remotes and Ethernet Output is designed with digital signal processing technology for true continuous monitoring (versus pulsed or intermittent) of wrist strap functionality (path-to-ground and presence of 1 megohm resistor) and operator safety according to accepted industry standards without capacitance variations from personnel or environment. This monitor is a dual workstation monitor for operators, ESD worksurfaces and metal tools.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Botron B55240 Technical Operator Roll 1/4" Thick 2'x40' Top Pad is made of soft vinyl foam material. Provides comfort and can protect parts susceptible to physical shock and damage. Can be used on carts, benches, inside trays, and shelves to provide a static safe work area. No grounding is needed when used over a hard dissipative surface.
|
Botron's B653040 Dissipative Two Layer Rubber Roll 30"x40' .080 thick. Dissipative top layer 10e8. Conductive bottom layer 10e4. It is reversible and will not burn and supports the use of constant monitors. 50' long rolls are available in 2', 30", 3', and 4' wide widths. Blue, Gray, and Lead Free Green.
|
Botron B1000 Multi Length Automatic/Programmable Tape Dispenser has a three digit soft touch keypad for easy programmming as well as digital auto advance and electric eye cut sensor. Program up to three differed tape sizes in manual or auto mode. Available cutting lengths of 20" up to 39". Cuts both 1" and 3" core tape sizes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Botron B496201 Intelligent Bench Top Ionizer is internet ready and monitored with a built in LED screen. This ionizer is incredibly accurate and effective at eliminating static charges. Software available. Self Cleaning.
|
Botron's B61250 Dissipative Two Layer Rubber Roll 2'x50' .060 thick. Dissipative top layer 10e8. Conductive bottom layer 10e4. It is reversible and will not burn and supports the use of constant monitors. 50' long rolls are available in 2', 30", 3', and 4' wide widths. Blue, Gray, and Lead Free Green.
|
Botron B92700 OMNIGRD Elite Multi-Ground Continuous Monitoring System with a rich feature set never before available, ESD facilities and sensitive component manufactures can monitor critical grounds in real time in applications ranging from the benchtop to capital equipment.Configurable to send email alerts on port status and power status.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Botron B486121 Benchtop Ionizer 7.5H x 7.1W x 2.7D As with all of Botrons ionization units the B486121 is designed to neutralize electrostatic charge in personal bench top environments, sensitive materials assembly, packaging, clean room and laboratories.
|
Bevco 7551E Everlast ergonomic adjustable height ESD polyurethane chair
has an 18" adjustable chrome footring and comes standard with mushroom
glides. Pneumatic lift adjusts seat height from 22" - 32" high. Fully
adjustable contour back and 360 degree swivel.
|
Botron B486110 SMALL BENCH TOP HIGH FREQUENCY IONIZER 4" x 4" x 7" As with all of Botron's ionization units the B486110 is designed to neutralize electrostatic charge in personal bench top environments, sensitive materials assembly, packaging, clean room and laboratories.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Botron's B65240 Dissipative Two Layer Rubber Roll 2'x40' .080 thick. Dissipative top layer 10e8. Conductive bottom layer 10e4. It is reversible and will not burn and supports the use of constant monitors. 50' long rolls are available in 2', 30", 3', and 4' wide widths. Blue, Gray, and Lead Free Green.
|
O.C. White 50000 Ultra Exhaust Fan- Screw Down Base provides 550cfm of air moving power. This high performance fan is
positioned on a 43″ Arm, and has a table edge clamp. ESD safe. 18"x5"x30". 120V. Made in the USA.
|
O.C. White 50010 Ultra Exhaust Fan-Table Edge Clamp provides 550cfm of air moving power. This high performance fan is
positioned on a 43″ Arm, and has a table edge clamp. ESD safe. 18"x5"x30". 120V. Made in the USA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bevco 3210E-F-GY Gray ESD Versa-E Backless Stool Seat Height Adjustment 19"-24"- ESD Mushroom Glide, 5 Star Polished Aluminum Base. This stool is built for durability and comfort with a sturdy construction. This backless stool fits a wide range of applications including but not limited to; general office, medical, laboratory, factory, electronic assembly and clean room. The 3210E-F-Navy comes with a 5-Star polished aluminum base, fabric seat material, and ESD Mushroom Glides. This static dissipative stool has a resistance of 10^5 to 10^9 ohms when measured according to the ANSI/ESD STM12.2006 standards.
|
Bevco 3210E-F-NY Navy Blue ESD Versa Backless Stool Seat Height Adjustment 19"-24"- ESD Mushroom Glide , 5 Star Polished Aluminum Base. This stool is built for durability and comfort with a sturdy construction. This backless stool fits a wide range of applications including but not limited to; general office, medical, laboratory, factory, electronic assembly and clean room. The 3210E-F-NY comes with a 5-Star polished aluminum base, fabric seat material, and ESD Mushroom Glides. This static dissipative stool has a resistance of 10^5 to 10^9 ohms when measured according to the ANSI/ESD STM12.2006 standards.
|
Botron B85395 15 Light full range 10e3-10e12 ohms. Measures surface resistivity and RTG. 9V Battery. Also available as a kit with 5lb weights. B85395KIT.
|
|
|
