|
|
|
|
|
|
|
|
|
|
|
Botron's B9704 Quad Bench Ground common point bench grounding system includes four standard banana jacks, a 10' long black 7 tinsel strand wire PVC with a #10 ring terminal connector.
|
Botron's B9743 Dual Metal Bench Ground molded enclosed box contains no metal edges and mounts easily under any workstation. Includes a 10' long ground cable with a #10 ring terminal connector, two banana jack receptables for secure ground connections and two parking studs (4mm) for storing cords when not in use.
|
Botron's B9742 Molded Dual Bench Ground molded enclosed box contains no
metal edges and mounts easily under any workstation. Includes a 10'
long ground cable with a #10 ring terminal connector, two banana jack
receptacles for secure grounding connections and two parking studs (4mm)
for storing cords when not in use.
|
|
|
|
|
|
|
|
|
|
|
|
|
IAC QS-2012641 Kimwipe Holder. Attaches to parts cup stringer, parts cup rack and multi bin panel.
|
IAC QS-6-6A Personnel; Grounding Block.
|
IAC QS-2012608 Solder Spool Holder, Holds 1-lb. spools of wire solder 3"H x 3"W x 2"D Single, Attaches to Parts Cup Stringer, Parts Cup Rack and Multi Bin Panel
|
|
|
|
|
|
|
|
|
|
|
|
|
IAC QS-2012459 Tool Trolly allows the operator to access air or electric tools from above. Ergonomically designed to aid the operator with repetitive reaching of tools. Mounts to the D4 uprights and includes one slide tool hanger.
|
IAC QS-2012609 Solder Spool Holder, Holds 1-lb. spools of wire solder 3"H x 6"W x 2"D Double, Attaches to Parts Cup Stringer, Parts Cup Rack and Multi Bin Panel
|
IAC QS-2012633 Dimension 4 Keyboard holder. CRT platform mounted. Attaches to the bottom of the CRT platform.
|
|
|
|
|
|
|
|
|
|
|
|
|
IAC QS-2012172 Parts Cup Stringer adjusts up/down and back/forth to aid the operator with repetitive reaching motion. The parts cup stinger accepts standard parts cup(s) and other accessories.
|
Dimension 4 36" Ergonomic Footrest pan
|
Dimension 4 60" Adjustable footrest
|
|
|
|
|
|
|
|
|
|
|
|
|
Parts Cup Stringer 72" Adjusts up/down, accepts standard parts cup and other accessories. Textured Black
|
D4 FootRest can be used alone or with Foot Pan (sold separately), 72"
|
IAC QS-2012182 Parts Cup Stringer 60" Adjusts up/down, accepts standard parts cup and other accessories. ESD Black
|
|
|
|
|
|
|
|
|
|
|
|
|
Parts Cup Stringer 72" Adjusts up/down, accepts standard parts cup and other accessories. ESD Black
|
Tool Trolley Assembly includes one sliding Tool Trolley Hanger 60" Textured Gray
|
IAC QS-2012453 Tool Trolley Assembly includes one sliding Tool Trolley Hanger72" Textured Gray.
|
|
|
|
|
|
|
|
|
|
|
|
|
IAC QS-2011922 Dimension 4 Shelf 12" x 60" standard laminate. Textured gray powder coat finish with gray laminate. 75 lb capacity.
|
IAC QS-2011932 D4 Metal Shelving 12" x 72". 75lb weight capacity evenly distributed.
|
IAC QS-2012629 D4 Swing Arm Pegboard 16"W x 16"H with lip. Accepts standard pegboard pegs. Organizes hand tools and other accessories.
|
|
|
|
|
|
|
|
|
|
|
|
|
IAC QS-1022918 Flat Panel Display Keyboard Holder W/Mouse Pad Assembly.
|
IAC QS-2012622 Dimension 4 CRT platform 75 # capacity. Mounts to the vertical uprights of the work station, brackets can be mounted to the inside or out side of the uprights.
|
IAC QS-2050002 Dimension 4 6" Drawer w/lock. Textured gray. Constructed of heavy-gauge steel and equipped with full-extension. 100-lb capacity metal ball bearing drawer slides.
|
|
|
|
|
|
|
|
|
|
|
|
|
IAC QS-2012212 Dimension 4 Electrical Channel 60", Textured Gray paint, Apollo Blue trim. Electrical channel with three, duplex outlets, on/off switch with pilot light, circuit breaker, and molded 8-ft power cord. UL listed.
|
IAC QS-2012626 Parts Cup Rack W/Swing Arm. 12-cup capacity. Mounts to inside or outside of uprights.
|
IAC QS-2011962 Dimension 4 Shelf 12" x 60" ESD laminate. Textured grey powder coat finish with grey laminate. 75 lb capacity evenly distributed. UL listed structural components.
|
|
|
|
|
|
|
|
|
|
|
|
|
IAC QS-2012159 Free standing Footrest. Independent adjustments for foot pan height and angle. Heave-gauge steel base with non-skid floor glides on base ans non-slip v-ribbed black rubber surface on foot pan.
|
IAC QS-2012213 Electrical channel with three, duplex outlets, on/off switch with pilot light, circuit breaker, and molded 8-ft power cord. UL listed.
|
IAC QS-2011972 12" x 72"ESD Metal Adjustable Shelving. The adjustable shelves can be specified with either standard and ESD laminate surfaces. Weight capacity of the standard shelf is 75lbs evenly distributed. Shelves are UL listed structural components.
|
|
|
|
|
|
|
|
|
|
|
|
|
IAC QS-2012632 D4 Flat Panel Display Swing Arm Assembly. Provides positioning in two planes for optimum viewing angles. Universal display mount complies with VESA MIS-D 100/75mm interface standards.
|
IAC QS-2050004 Dimension 4 12" File drawer w/lock. Textured gray. Constructed of heavy-gauge steel and equipped with full-extension, 100-lb capacity metal ball bearing drawer slides.May be mounted left or right and stacked for multiple drawer units.
|
IAC QS-2012639 D4 Universal CPU Holder Slide Out. Safely suspends the CPU beneath the work surface, saves valuable workspace. Slide mechanism permits east access to CPU. Prevents damage from dust, floor, moisture, vacuum cleaning and mops.
|
|
|
|
|
|
|
|
|
|
|
|
|
IAC QS-1050003-BL 6" double file file drawer, full extension glides,
mounts right or left side of workbench, EZE blue paint with white drawer
front. Recessed drawer handles.
|
IAC QS-1050003-BL 6" double file file drawer, full extension glides,
mounts right or left side of workbench, Sky blue paint with white drawer
front. Recessed drawer handles.
|
IAC QS-2012302 Dimension 4 Light Assembly 60". Offers the widest angle of light diffusion. Prismatic Diffusers are flat sheets of plastic with a prismatic configuration on the bottom surface to direct light rays at the highest angles from the fixture plane.
|
|
|
|
|
|
|
|
|
IAC QS-2012303 offers the widest angle of light diffusion. Prismatic Diffusers are flat sheets of plastic with a prismatic configuration on the bottom surface to direct light rays at the highest angles from the fixture plane.
|
|