|
|
|
|
|
|
|
|
|
|
|
|
|
|
Excelta 3C-ESD 4-5/8" ESD safe plastic tweezers with sharp pointed tips. Surface resistivity of 105 Ohm cm. Made in China
|
Excelta 2A-ESD Flat Tip Conductive ESD-Safe Tweezers. 4-5/8" Conductive plastic tweezesr with tapered tips and 1/16" flat points. Surface resistivity of 10e5 Ohm cm. Made in China.
|
Transforming Technologies SM0873 ESD Safe SMD Component Storage Boxes
are made of volume loaded polystyrene. Static-safe SMD boxes with
spring-loaded hinges are designed
to interlock for easy organization and storage of surface mount
components. Perfect for engineering labs, electronics manufacturing and
automotive applications. Available with conductive
black or clear metalized lids. A six drawer cabinet made with
conductive plastic allows for storage and organization of the boxes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Botron's B2008 long life coil cord has an 1/8" snap, is 6' long, and has a built in 1 meg Ohm resistor. Made of black PVC insulation and 7 strand tinsel wire that provides superior strain reliefs at both ends. Available in 6' and 12' lengths and 1/8" and 1/4" snaps. Alligator clip can be removed. Barrel on the end.
|
Botron's B2004 long life coil cord has an 1/4" snap, is 6' long, and has a built in 1 meg Ohm resistor. Made of black PVC insulation and 7 strand tinsel wire that provides superior strain reliefs at both ends. Available in 6' and 12' lengths and 1/8" and 1/4" snaps.
|
Excelta PVB-CB-332 Bent Probe/Cup Assembly. These 30" bent probe
assemblies are black Buna-N. The cups are non-marring with a working
temperature of -5 to 250 F. They are for use of all or Excelta's vacuum
tools except Roto-Pic.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Transforming Technologies SM0874 ESD Safe SMD Component Storage Boxes
are made of volume loaded polystyrene. Static-safe SMD boxes with
spring-loaded hinges are designed
to interlock for easy organization and storage of surface mount
components. Perfect for engineering labs, electronics manufacturing and
automotive applications. Available with conductive
black or clear metalized lids. A six drawer cabinet made with
conductive plastic allows for storage and organization of the boxes.
|
Excelta PVB-CB-12 Bent Probe/Cup Assembly. These 30" bent probe
assemblies are black Buna-N. The cups are non-marring with a working
temperature of -5 to 250 F. They are for use of all or Excelta's vacuum
tools except Roto-Pic.
|
Excelta PVB-CB-38 Bent Probe/Cup Assembly. These 30" bent probe
assemblies are black Buna-N. The cups are non-marring with a working
temperature of -5 to 250 F. They are for use of all or Excelta's vacuum
tools except Roto-Pic.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Excelta PVB-CB-14 Bent Probe/Cup Assembly. These 30" bent probe
assemblies are black Buna-N. The cups are non-marring with a working
temperature of -5 to 250 F. They are for use of all or Excelta's vacuum
tools except Roto-Pic.
|
Excelta PVB-CB-316 Bent Probe/Cup Assembly. These 30" bent probe
assemblies are black Buna-N. The cups are non-marring with a working
temperature of -5 to 250 F. They are for use of all or Excelta's vacuum
tools except Roto-Pic.
|
Excelta PVB-CB-18 Bent Probe/Cup Assembly. These 30" bent probe
assemblies are black Buna-N. The cups are non-marring with a working
temperature of -5 to 250 F. They are for use of all or Excelta's vacuum
tools except Roto-Pic.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Transforming Technologies SM0875 ESD Safe SMD Component Storage Boxes
are made of volume loaded polystyrene. Static-safe SMD boxes with
spring-loaded hinges are designed
to interlock for easy organization and storage of surface mount
components. Perfect for engineering labs, electronics manufacturing and
automotive applications. Available with conductive
black or clear metalized lids. A six drawer cabinet made with
conductive plastic allows for storage and organization of the boxes.
|
Botron's B2024 long life coil cord has an 1/4" snap, is 12' long, and has a built in 1 meg Ohm resistor. Made of black PVC insulation and 7 strand tinsel wire that provides superior strain reliefs at both ends. Available in 6' and 12' lengths and 1/8" and 1/4" snaps.
|
Botron's B2028 long life coil cord has an 1/8" snap, is 12' long, and has a built in 1 meg Ohm resistor. Made of black PVC insulation and 7 strand tinsel wire that provides superior strain reliefs at both ends. Available in 6' and 12' lengths and 1/8" and 1/4" snaps. Alligator clip can be removed. Barrel on the end.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Transforming Technologies HG1390S Hi-Vis Yellow Heel Grounder is
constructed from durable materials and features a classic hi-visibility
yellow/green hook & loop closure with an elastic insert to maximize
fit and comfort.
HG1390S heel grounders connect the person wearing them to ground via a
proper floor mat or flooring material. Wearing the conductive ribbon
inside the shoe or sock assures proper electrical contact with the user.
A buried 1 meg ohm resistor is standard. HG1390S heel grounders are worn
on both feet to provide consistent grounding while in motion.****Sold in multiples of 10****
Meets or exceeds requirements of ANSI ESD-S20.20.
|
Transforming Technologies SM0876 ESD Safe SMD Component Storage Boxes
are made of volume loaded polystyrene. Static-safe SMD boxes with
spring-loaded hinges are designed
to interlock for easy organization and storage of surface mount
components. Perfect for engineering labs, electronics manufacturing and
automotive applications. Available with conductive
black or clear metalized lids. A six drawer cabinet made with
conductive plastic allows for storage and organization of the boxes.
|
Transforming Technologies HG1360B Blue Heel Grounder features a stretch hook and loop closure strap to maximize fit and
comfort. The cup of the HG1360B Heel Grounder is a symmetrical design
that can be reversed when put on to double the lifespan.
HG1360B heel grounders connect the person wearing them to ground via a
proper floor mat or flooring material. Wearing the conductive ribbon
inside the shoe or sock assures proper electrical contact with the user.
The ribbon connects to the conductive rubber to complete the circuit
between the operator and the static controlled floor or mat.
A buried 1 meg ohm resistor ensures safety and is standard. HG1360B heel
grounders must be worn on both feet to provide consistent grounding
while in motion.****Sold in multiples of 10****
Meets or exceeds requirements of ANSI ESD-S20.20.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Transforming Technologies HG1360R Red Heel Grounder features a stretch hook and loop closure strap to maximize fit and
comfort. The cup of the HG1360R Heel Grounder is a symmetrical design
that can be reversed when put on to double the lifespan.
HG1360R heel grounders connect the person wearing them to ground via a
proper floor mat or flooring material. Wearing the conductive ribbon
inside the shoe or sock assures proper electrical contact with the user.
The ribbon connects to the conductive rubber to complete the circuit
between the operator and the static controlled floor or mat.
A buried 1 meg ohm resistor ensures safety and is standard. HG1360R heel
grounders must be worn on both feet to provide consistent grounding
while in motion.****Sold in multiples of 10****
Meets or exceeds requirements of ANSI ESD-S20.20.
|
Transforming Technologies HG1360 Black Heel Grounder features a stretch hook and loop closure strap to maximize fit and
comfort. The cup of the HG1360 Heel Grounder is a symmetrical design
that can be reversed when put on to double the lifespan.
HG1360 heel grounders connect the person wearing them to ground via a
proper floor mat or flooring material. Wearing the conductive ribbon
inside the shoe or sock assures proper electrical contact with the user.
The ribbon connects to the conductive rubber to complete the circuit
between the operator and the static controlled floor or mat.
A buried 1 meg ohm resistor ensures safety and is standard. HG1360 heel
grounders must be worn on both feet to provide consistent grounding
while in motion. ****Sold in multiples of 10****
Meets or exceeds requirements of ANSI ESD-S20.20.
|
Botron's B09924 Conductive Brush 7"x1.5" has an ergonomic handle that was designed to provide comfort for the operator.It features an angled grip handle and three rows of brushes that provide maximum coverage. Is great for cleaning printed circuit boards and other static sensitive components. Safely remove dust, dirt particles and static charge while grounded.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Botron's B09921 Conductive Brush 6"x1/2" is great for cleaning with precision printed circuit boards and other static sensitive components. Safely remove dust, dirt particles and static charge while grounded.
|
Botron's B09920 Conductive Brush 5"x1/4" ultra slim design allows the user to reach into the tightest of areas and clean the smallest of electronic components. Is great for cleaning with precision printed circuit boards and other static sensitive components. Safely remove dust, dirt particles and static charge while grounded.
|
Botron's B9715 Straight Wire molded low profile design includes a 10' long black 7 tinsel strand wire PVC with a #10 ring terminal connector. The molded connection point houses a 7mm (1/4") stud.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Excelta 260A-ESD Spatula is ideal for placing epoxies or lubricant
in very small amounts into tight places. This tool is conductive. Shape:
Straight, Material: Aluminum Handle, Tip Size: .010".
|
Excelta 260B-ESD Spatula is ideal for placing epoxies or lubricant in very small amounts into tight places. This tool is conductive. Shape: Straight, Material: Aluminum Handle, Tip Size: 0.15"
|
Excelta 260C-ESD Spatula is ideal for placing epoxies or lubricant in
very small amounts into tight places. This tool is conductive. Shape:
Straight, Material: Aluminum Handle, Tip Size: .015". These mini-spatulas (oilers) have handles made of conductive aluminum. They are ideal for placing epoxies or lubricant in very small amounts into tight places. The overall length is 2.5" (63mm).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Botron's B9703 Common Point Ground includes a 10' long black 7 tinsel strand wire PVC with a #10 ring terminal connector. Dual standard banana jacks allow two workers the ability to plug into one ground point. The molded connection point houses a 1 meg Ohm resistor and attaches to table mats via 10mm stud.
|
Botron's B9701 Floor Mat Ground includes a 10' long black 7 tinsel strand wire PVC with a #10 ring terminal connector. Low profile mushroom cap easily attaches to floor mats. Reduces tripping and allows chairs to easily roll over them without getting snagged. No resistor.
|
Botron's B2308 GEM long life coil cord has an 1/8" snap, is 6' long, and has a built in 1 meg Ohm resistor. Made of PVC insulation and 7 strand tinsel wire that provides superior strain reliefs at both ends. Available in 6' and 12' lengths.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Botron's B09922 Conductive Brush 6"x3/4" is great for cleaning with precision printed circuit boards and other static sensitive components. Safely remove dust, dirt particles and static charge while grounded.
|
Excelta PVB-CB-58 Bent Probe/Cup Assembly. These 30" bent probe
assemblies are black Buna-N. The cups are non-marring with a working
temperature of -5 to 250 F. They are for use of all or Excelta's vacuum
tools except Roto-Pic.
|
Desco 09838 Ground Plug Adapter converts
a standard outlet into a groundable point for wrist straps and other
grounding hardware with banana plugs. Made in the USA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Botron's B9704 Quad Bench Ground common point bench grounding system includes four standard banana jacks, a 10' long black 7 tinsel strand wire PVC with a #10 ring terminal connector.
|
Botron's B09926 Large Conductive Brush 7"x3.5" has an ergonomic handle that was designed to provide comfort for the operator.It features an angled grip handle and three rows of brushes that provide maximum coverage. Is great for cleaning printed circuit boards and other static sensitive components. Safely remove dust, dirt particles and static charge while grounded.
|
Botron's B09925 Conductive Brush 7"x2.5" has an ergonomic handle that was designed to provide comfort for the operator.It features an angled grip handle and two rows of brushes that provide maximum coverage. Is great for cleaning printed circuit boards and other static sensitive components. Safely remove dust, dirt particles and static charge while grounded.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Excelta PVB-CB-34 Bent Probe/Cup Assembly. These 30" bent probe
assemblies are black Buna-N. The cups are non-marring with a working
temperature of -5 to 250 F. They are for use of all or Excelta's vacuum
tools except Roto-Pic.
|
Botron's B2328 GEM long life coil cord has an 1/8" snap, is 12' long, and has a built in 1 meg Ohm resistor. Made of PVC insulation and 7 strand tinsel wire that provides superior strain reliefs at both ends. Available in 6' and 12' lengths.
|
Desco 09028 Wrist Strap, Elastic, Adjustable Band Only 4mm Snap reliably
removes generated static charge. Additionally, silver fibers are
antibacterial to help keep the band and operator clean. Extra wide, soft
elastic band increases wearer comfort. Only one item to stock, may be
fitted to most people. Made in the USA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Transforming Technologies HG1360NM-2 Non-Marking Heel Grounder is constructed from a non-marking and highly dissipative
three layer rubber. The reversible 1.5inch wide rubber cup, secures both
at the back and underneath the heel. Its 7.5inch length rubber provides
enough cup volume to fit comfortably on those with larger shoe sizes.
The 7inch stretch hook and loop enclosure ensures a comfort fit.
These heel grounders connect the person wearing them to ground via a
proper floor mat or flooring material. Wearing the conductive ribbon
inside the shoe or sock assures proper electrical contact with the user.
A buried 1 meg ohm resistor is standard. Heel grounders are worn on
both feet to provide consistent grounding while in motion. ****Sold in multiples of 10**** A buried 1meg resistor is built into the strap for safety and to comply with ANSI ESD S2020.
|
Botron B8018 Static Dissipative Rubber and Vinyl Mat Cleaner is designed and formulated to clean table mat surfaces to insure all insulative dirt and other contaminants are removed. 2 sizes available. 6oz and 1qt spray bottle.
|
Menda 35790 Yellow Wash Bottle 8oz is used to hold water for wetting
sponges at soldering stations, to hold cleaning agents or similar
liquids. Made of low density polyethylene with a swan neck spout. Long
lasting dissipative properties.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Menda 35796 Yellow Trigger Spray Bottle 8oz provides controlled delivery
of solvents, cleaners, water and oils. Made of low density
polyethylene with a trigger spray nozzle-spray, stream, and off
settings. Long lasting dissipative properties. Also available in blue (35797).
|
Desco 17200 Foot Grounder w/1 Meg Resistor has a hook and loop fastening system. Size adjustable material expands to fit most shoe sizes comfortably and flex during walking. Reinforced material prevents tearing-increasing the service life of foot grounder.
|
Botron's B09927 Conductive Brush 3.75"x2.75" is great for cleaning printed circuit boards and other static sensitive components. Safely remove dust, dirt particles and static charge while grounded.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Botron's B9743 Dual Metal Bench Ground molded enclosed box contains no metal edges and mounts easily under any workstation. Includes a 10' long ground cable with a #10 ring terminal connector, two banana jack receptables for secure ground connections and two parking studs (4mm) for storing cords when not in use.
|
Desco 10446 Reztore Static Dissipative Rubber and Vinyl Mat Cleaner 1 QT removes dust, grease, grime, fingerprints, solder flux and other contaminants from ESD mats and other surfaces. Alcohol-free formula. Excessive use of alcohol-based cleaners may dry-out mats (vinyl or rubber) and degrade performance.
|
Desco 09183 Wristband, Jewel, Magsnap, Adj, Elastic, Onyn has a superior
electrical connection to eliminate intermittent failures of traditional
snaps; extends the lifespan of the wrist strap. Maintains 1-5 pound
release to prevent accidental disconnects and increased safety. Provides better
connection with operator especially for dry skin or dry environments.
Additionally, silver fibers are antibacterial to help keep the band and
operator clean. Band only. Available with 6' and 12' coil cords. Made in the USA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Menda 35793 Yellow Wash Bottle 16oz is used to hold water for wetting
sponges at soldering stations, to hold cleaning agents or similar
liquids. Made of low density polyethylene with a swan neck spout. Long
lasting dissipative properties.
|
Menda 35798 Yellow Trigger Spray Bottle 16oz provides controlled
delivery of solvents, cleaners, water and oils. Made of low density
polyethylene with a trigger spray nozzle-spray, stream, and off
settings. Long lasting dissipative properties.bAlso available in blue (35799).
|
SCS 8004 Charge Guard ESD Surface and Mat Cleaner 25 Wipes removes dust, grease, grime, fingerprints, solder flux and other contaminants from ESD mats and other surfaces. Alcohol-free formula. Excessive
use of alcohol-based cleaners may dry-out mats (vinyl or rubber) and
degrade performance. Non-Hazardous, non-flammable green chemistry
formula. Packaged in Dri-Shield 2000 series moisture barrier pouch.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Botron B6717 10" x 17" Static Awareness Poster 5/PK. Self adhesive bright yellow with black print poster lets employees know they are in a electrostatic sensitive area.
|
Transforming Technologies ESD Socks are used in combination of ESD flooring and footwear and can be an effective way to ground personnel to control electrostatic discharges when using a wrist strap is not practical. For this system to be effective, the ESD flooring and footwear must have a low enough resistance to allow the voltage from the operator to flow to ground. Available in Small, Medium, and Large sizes.
|
Excelta EXC-TH-BE silicone multi-purpose tool holder is ideal for
holding a variety of tools neatly and safely on the workbench.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Botron's B9742 Molded Dual Bench Ground molded enclosed box contains no
metal edges and mounts easily under any workstation. Includes a 10'
long ground cable with a #10 ring terminal connector, two banana jack
receptacles for secure grounding connections and two parking studs (4mm)
for storing cords when not in use.
|
Botron's B9848 3/8" Male Snap Set is used with Botron's B9844 snap tool. Excellent way to be sure hardware is securely fastened. 10mm snaps and rivets-stud. 100 each per bag.
|
Botron's B9848 3/8" Female Snap Set is used with Botron's B9844 snap tool. Excellent way to be sure hardware is securely fastened. 10mm snaps and rivets-socket. 100 each per bag.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Botron B6716 Static Safe Work Area Bench Sign 1"x 6" 10/PK. Self adhesive yellow with black print reading "Attention Static Safe Work Area". Also available in Green/Lead Free.
|
Desco 19695 Dual Snap-One Cord, 6', 4mm Snap, Right Angle Plug fits standard dual wire monitors and grounding jacks. If one conductor is damaged, the operator will maintain the path-to-ground through the other conductor. Provides a park station for the mono plug a cord when not in use. Made in the USA.
|
Excelta 299D-G Kevlar Heavy Duty Scissors- Ergo Grips. General purpose
scissors features ergonomic design of the handles (has no finger holes
like traditional scissors). With added return springs and padded grips,
these scissors can be used for long periods of time without hand
fatigue. ESD safe.
|
|
|
