|
|
|
|
|
|
|
|
|
|
|
|
|
|
Foamtec HT4903TB-X1-Bag-10 Black Foam Face Masks.
ConForm Masks are foam face masks, constructed with a
super fine pore, high density polyurethane foam designed to offer
limited protection against liquid droplet transmission. These masks are
engineered to facilitate speaking and are comfortable to wear for
extended durations. Unlike traditional 3-ply non-woven masks, the
soft,stretchable polyurethane foam does not stress the user behind the
ears. The formfitting design allows the user to eliminate manual
adjustments during use. Eyeglasses will not fog. Can be machine washed
and dried, under delicate settings. Bag of 10. ***On Sale Now! While Supplies Last!***
|
Transforming Technologies HG1390S Hi-Vis Yellow Heel Grounder is
constructed from durable materials and features a classic hi-visibility
yellow/green hook & loop closure with an elastic insert to maximize
fit and comfort.
HG1390S heel grounders connect the person wearing them to ground via a
proper floor mat or flooring material. Wearing the conductive ribbon
inside the shoe or sock assures proper electrical contact with the user.
A buried 1 meg ohm resistor is standard. HG1390S heel grounders are worn
on both feet to provide consistent grounding while in motion.****Sold in multiples of 10****
Meets or exceeds requirements of ANSI ESD-S20.20.
|
Transforming Technologies HG1360B Blue Heel Grounder features a stretch hook and loop closure strap to maximize fit and
comfort. The cup of the HG1360B Heel Grounder is a symmetrical design
that can be reversed when put on to double the lifespan.
HG1360B heel grounders connect the person wearing them to ground via a
proper floor mat or flooring material. Wearing the conductive ribbon
inside the shoe or sock assures proper electrical contact with the user.
The ribbon connects to the conductive rubber to complete the circuit
between the operator and the static controlled floor or mat.
A buried 1 meg ohm resistor ensures safety and is standard. HG1360B heel
grounders must be worn on both feet to provide consistent grounding
while in motion.****Sold in multiples of 10****
Meets or exceeds requirements of ANSI ESD-S20.20.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Transforming Technologies HG1360R Red Heel Grounder features a stretch hook and loop closure strap to maximize fit and
comfort. The cup of the HG1360R Heel Grounder is a symmetrical design
that can be reversed when put on to double the lifespan.
HG1360R heel grounders connect the person wearing them to ground via a
proper floor mat or flooring material. Wearing the conductive ribbon
inside the shoe or sock assures proper electrical contact with the user.
The ribbon connects to the conductive rubber to complete the circuit
between the operator and the static controlled floor or mat.
A buried 1 meg ohm resistor ensures safety and is standard. HG1360R heel
grounders must be worn on both feet to provide consistent grounding
while in motion.****Sold in multiples of 10****
Meets or exceeds requirements of ANSI ESD-S20.20.
|
Transforming Technologies HG1360 Black Heel Grounder features a stretch hook and loop closure strap to maximize fit and
comfort. The cup of the HG1360 Heel Grounder is a symmetrical design
that can be reversed when put on to double the lifespan.
HG1360 heel grounders connect the person wearing them to ground via a
proper floor mat or flooring material. Wearing the conductive ribbon
inside the shoe or sock assures proper electrical contact with the user.
The ribbon connects to the conductive rubber to complete the circuit
between the operator and the static controlled floor or mat.
A buried 1 meg ohm resistor ensures safety and is standard. HG1360 heel
grounders must be worn on both feet to provide consistent grounding
while in motion. ****Sold in multiples of 10****
Meets or exceeds requirements of ANSI ESD-S20.20.
|
Transforming Technologies HG1360NM-2 Non-Marking Heel Grounder is constructed from a non-marking and highly dissipative
three layer rubber. The reversible 1.5inch wide rubber cup, secures both
at the back and underneath the heel. Its 7.5inch length rubber provides
enough cup volume to fit comfortably on those with larger shoe sizes.
The 7inch stretch hook and loop enclosure ensures a comfort fit.
These heel grounders connect the person wearing them to ground via a
proper floor mat or flooring material. Wearing the conductive ribbon
inside the shoe or sock assures proper electrical contact with the user.
A buried 1 meg ohm resistor is standard. Heel grounders are worn on
both feet to provide consistent grounding while in motion. ****Sold in multiples of 10**** A buried 1meg resistor is built into the strap for safety and to comply with ANSI ESD S2020.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diamond FACE-MASK-LEVEL-ONE-BOX50-BLUE Face Mask Box of 50 3 Ply Latex Free Ear Loop Face Mask . Silicon and lint
free. Ultrasonic bonding reduces
contamination and out gassing. Recommended for class 100-1000 cleanroon
use. 50/BX. ***********Price Reduction***********
|
Menda 35790 Yellow Wash Bottle 8oz is used to hold water for wetting
sponges at soldering stations, to hold cleaning agents or similar
liquids. Made of low density polyethylene with a swan neck spout. Long
lasting dissipative properties.
|
Menda 35796 Yellow Trigger Spray Bottle 8oz provides controlled delivery
of solvents, cleaners, water and oils. Made of low density
polyethylene with a trigger spray nozzle-spray, stream, and off
settings. Long lasting dissipative properties. Also available in blue (35797).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Desco 17200 Foot Grounder w/1 Meg Resistor has a hook and loop fastening system. Size adjustable material expands to fit most shoe sizes comfortably and flex during walking. Reinforced material prevents tearing-increasing the service life of foot grounder.
|
Menda 35793 Yellow Wash Bottle 16oz is used to hold water for wetting
sponges at soldering stations, to hold cleaning agents or similar
liquids. Made of low density polyethylene with a swan neck spout. Long
lasting dissipative properties.
|
Menda 35798 Yellow Trigger Spray Bottle 16oz provides controlled
delivery of solvents, cleaners, water and oils. Made of low density
polyethylene with a trigger spray nozzle-spray, stream, and off
settings. Long lasting dissipative properties.bAlso available in blue (35799).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bowman MP-070 Sign Holder-Vertical holds 8.5" x 11" signage. Screw holes
to mount to wall or mount to Respiratory Hygiene Stations. Made in the
USA.
|
SCS D343.55.5-Dri-Shield 3400 Series Moisture Barrier Bag 3x5" x 5.5" 100/PK
4mil thick is designed for moisture and electrostatic discharge (ESD)
sensitive items (such as SMT). Provides physical protection for
contents. These bags do not have a set life span. For best results, bag
inventory should be continually replenished. This item is built to
order. Orders will be accepted for a minimum of 40. Many sizes to choose from.
|
Bowman MP-075 Sign Holder-Horizontal holds 11" x 8.5" signage. Screw holes
to mount to wall or mount to Respiratory Hygiene Stations. Made in the
USA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SCS D302.66.1-Dri-Shield 3000 Series Moisture Barrier Bag 2x6" x 6.1" 100/PK 6mil thick is designed for moisture and electrostatic discharge (ESD)
sensitive items (such as SMT). Provides physical protection for
contents. These bags do not have a set life span. For best results, bag
inventory should be continually replenished. This item is built to
order. Orders will be accepted for a minimum of 25. Many sizes to choose from.
|
Desco 79278 Westcorp ESD Tape, Clear Yellow Stripe 2" x 72 YDS, 3 " Core
generates less that 50 volts when unwound from roll (at 73 F. 45% RH
average) making it safe to use around most ESD sensitive items. ESD symbols distinguish ESD version tapes from standard, non-ESD tapes. Plastic Core.
|
Diamond FACE-MASK-LEVEL-Four-BOXES 50-BLUE Face Mask 4 Boxes of 50 3 Ply
Latex Free Ear Loop Face Mask is cleanroom processed and packaged to
reduce particles. Silicon and lint free. Ultrasonic bonding reduces
contamination and out gassing. Recommended for class 100-1000 cleanroon
use.4-Boxes of 50.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Transforming Technologies CTM1836-Frame 18"x36" Tacky Mat Frame.Tacky
mat frames provide a moveable base for mounting adhesive floor mats
without the limitations of mats secured directly to the floor. Frames
expand the applications where floor mounted sticky mats are
either inconvenient or impossible, such as carpeted, concrete, grimy,
oily, damp or temporary walkways.
|
Transforming Technologies CTM1836 18"x36" Tacky Adhesive Mats feature a
tacky peel-able surface that traps dirt, dust and debris normally
carried by shoes. Ideal for any areas where cleanliness is important
such as medical labs, electronic assembly areas, and clean rooms. Leave the dirt at the door! Mats
offer 30 numbered peel-able sheets, 4 mats/case. CTM1836BL, CTM1836WH.
|
SCS 2381 Dual-Wire Small Wrist Strap with 5' Coil Cord is a premium metal
expansion wrist strap with more reliable path-to-ground. Very
comfortable, designed not to pull or pinch hair. Long wearing and easy
to clean. One Megohm resistor located at socket. Made to be used in
conjunction with all SCS dual-wire workstation monitors. Made in the
USA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tians Epic 91588 Beard Cover, Pleated, Poly, White, Universal is Latex free,
low lint, 100% machine made cover that expands from .75 x 5" packed size
and opens up to a full sized beard cover. With their exclusive
production method, this item is never touched by human hands and the
bio-burden is nearly eliminated. Neatly
stacked and cleanroom packed - 100 pieces per sealed inner polybag, 10
polybags per sealed master bag, 1000 pieces per case.
|
SCS 2382 Dual-Wire Medium Wrist Strap with 5' Coil Cord is a premium metal
expansion wrist strap with more reliable path-to-ground. Very
comfortable, designed not to pull or pinch hair. Long wearing and easy
to clean. One Megohm resistor located at socket. Made to be used in
conjunction with all SCS dual-wire workstation monitors. Made in the
USA.
|
Tians Epic 82478-18 18" Blue Sleeve Latex free / low lint sleeve for use in some critical environments, and
many general application areas. Breathable cloth-like fabric is
comfortable and cool. Features include elastic ends, serged seam
construction and are tapered for a proper fit. Neatly folded and cleanroom packed - 100 pieces per sealed inner
polybag, 2 polybags per sealed master bag, 200 pieces per case. Also available in white.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SCS 2383 Dual-Wire Large Wrist Strap with 5' Coil Cord is a premium metal
expansion wrist strap with more reliable path-to-ground. Very
comfortable, designed not to pull or pinch hair. Long wearing and easy
to clean. One Megohm resistor located at socket. Made to be used in
conjunction with all SCS dual-wire workstation monitors. Made in the
USA.
|
Tians Epic 514673-L Large Disposable Shoe Cover shoe cover with non-marking skid resistant bottom surface.
Trimmed in latex free elastic for an adjustable snug fit. Machine welded
seams feature encapsulated elastic to reduce particulation and increase
durability. Lightweight yet durable and breathable.
|
Tians Epic 514673-2X-L 2X-Large Disposable Shoe Cover shoe cover with non-marking skid resistant bottom surface.
Trimmed in latex free elastic for an adjustable snug fit. Machine welded
seams feature encapsulated elastic to reduce particulation and increase
durability. Lightweight yet durable and breathable.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tians Epic 82488-24 24" White Sleeve Latex free / low lint sleeve for use in some critical environments, and
many general application areas. Breathable cloth-like fabric is
comfortable and cool. Features include elastic ends, serged seam
construction and are tapered for a proper fit. Neatly folded and cleanroom packed - 100 pieces per sealed inner
polybag, 2 polybags per sealed master bag, 200 pieces per case.
|
Transforming Technologies CTM2436 24"x36" Tacky Adhesive Mats feature a
tacky peel-able surface that traps dirt, dust and debris normally
carried by shoes. Ideal for any areas where cleanliness is important
such as medical labs, electronic assembly areas, and clean rooms. Leave
the dirt at the door! Mats offer 30 numbered peel-able sheets, 4
mats/case. CTM2436BL, CTM2436WH.
|
Bowman FM013-0212 Triple Face Mask Dispenser holds three boxes of ear-loop
masks in bulk. hinges. Constructed of durable Quartz Beige ABS Plastic.
Keyholes for the wall. Face Masks not included. Made in U.S.A.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tians Epic 200811-L Large Basic Protection Coverall-White Latex free / low lint coverall for use in some critical / clean
environments. Nonwoven fabric is cloth-like and cool to wear. Features
include an attached hood, attached boots, zipper front entry and elastic
wrists.Neatly folded and packed 25 pieces per case in a sealed inner poly-bag.
|
Botron's B09622 PCB Probe 6" is a multi probe with a forming tip at one end used when soldering and at the other end a hooking tip for holding wires. Removes unwanted dirt and clippings from PCB's. Priced per piece. Sold in packs of 100.
|
Transforming Technologies CTM2645 26"x45" Tacky Adhesive Mats feature a
tacky peel-able surface that traps dirt, dust and debris normally
carried by shoes. Ideal for any areas where cleanliness is important
such as medical labs, electronic assembly areas, and clean rooms. Leave
the dirt at the door! Mats offer 30 numbered peel-able sheets, 4
mats/case. CTM2645BL, CTM2645WH.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bowman BK004-0111 Face Mask Dispenser holds N95 valve respirator style
face masks, eye shields, cone style face masks, or other bulk items.
Keyholes for wall mounting
-Clear PETG Plastic. Pivot hinge lid. Top dispensing. Face Masks not
included. Made in U.S.A.
|
Transforming Technologies CTM2436-Frame 24"x36" Tacky Mat Frame.Tacky
mat frames provide a moveable base for mounting adhesive floor mats
without the limitations of mats secured directly to the floor. Frames
expand the applications where floor mounted sticky mats are
either inconvenient or impossible, such as carpeted, concrete, grimy,
oily, damp or temporary walkways.
|
Bowman FM014-0212 Quint Face Mask Dispenser holds five boxes of ear-loop
masks in bulk. hinges. Constructed of durable Quartz Beige ABS Plastic.
Keyholes for the wall. Face Masks not included. Made in U.S.A.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Transforming Technologies CTM2645-Frame 26"x45" Tacky Mat Frame.Tacky
mat frames provide a moveable base for mounting adhesive floor mats
without the limitations of mats secured directly to the floor. Frames
expand the applications where floor mounted sticky mats are
either inconvenient or impossible, such as carpeted, concrete, grimy,
oily, damp or temporary walkways.
|
Tians Epic 846855-S High Performance/Static Dissipative Frock-Small is a lint
free film coated frock for use in critical, ESD and low particulate
clean environments. Suitable for exposure to bloodborne pathogens, some
hazardous liquids and any wet general maintenance areas. Features
include a snap front, knit wrists and knit collar. Microporous
Fabric,Cleanroom, Snaps, No Pocket, Knit Wrist & Collar, White, Size
Small, 30 each per case.
|
Tians Epic 846855-M High Performance/Static Dissipative Frock-Medium is a lint
free film coated frock for use in critical, ESD and low particulate
clean environments. Suitable for exposure to bloodborne pathogens, some
hazardous liquids and any wet general maintenance areas. Features
include a snap front, knit wrists and knit collar. Microporous
Fabric,Cleanroom, Snaps, No Pocket, Knit Wrist & Collar, White, Size Medium, 30 each per case.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tians Epic 846855-L High Performance/Static Dissipative Frock-Large is a lint
free film coated frock for use in critical, ESD and low particulate
clean environments. Suitable for exposure to bloodborne pathogens, some
hazardous liquids and any wet general maintenance areas. Features
include a snap front, knit wrists and knit collar. Microporous
Fabric,Cleanroom, Snaps, No Pocket, Knit Wrist & Collar, White, Size Large, 30 each per case.
|
Tians Epic 846855-XL High Performance/Static Dissipative Frock-X-Large is a lint
free film coated frock for use in critical, ESD and low particulate
clean environments. Suitable for exposure to bloodborne pathogens, some
hazardous liquids and any wet general maintenance areas. Features
include a snap front, knit wrists and knit collar. Microporous
Fabric,Cleanroom, Snaps, No Pocket, Knit Wrist & Collar, White, Size X-Large, 30 each per case.
|
SCS 7001518-Dri-Shield 2000 Series Moisture Barrier Bag 15"x18" 100/PK 3.6mil thick is designed for moisture and electrostatic discharge (ESD)
sensitive items (such as SMT). Provides physical protection for
contents. These bags do not have a set life span. For best results, bag
inventory should be continually replenished. Many sizes to choose from.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SCS D30424-Dri-Shield 3000 Series Moisture Barrier Bag 4"x24" 100/PK 6mil thick is designed for moisture and electrostatic discharge (ESD)
sensitive items (such as SMT). Provides physical protection for
contents. These bags do not have a set life span. For best results, bag
inventory should be continually replenished. This item is built to
order. Orders will be accepted for a minimum of 10. Many sizes to choose from.
|
Bowman FM404-0111 Locking Face Mask Dispenser holds four boxes of
ear-loop masks in bulk. It features a locking lid with a pivot hinges.
Designed as top loading, bottom dispensing product, it reduces the
chance of debris, dust, or contaminants being exposed to the product
inside. Constructed of durable Clear PETG ABS Plastic. Keyholes for the wall.Face Masks not included.
Made in U.S.A.
|
Bowman FM404-0212 Locking Face Mask Dispenser holds four boxes of
ear-loop masks in bulk. It features a locking lid with a pivot hinges.
Designed as top loading, bottom dispensing product, it reduces the
chance of debris, dust, or contaminants being exposed to the product
inside. Constructed of durable Quartz Beige ABS Plastic. Keyholes for the wall. Face Masks not included.
Made in U.S.A.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bowman FM404-0213 Locking Face Mask Dispenser holds four boxes of
ear-loop masks in bulk. It features a locking lid with a pivot hinges.
Designed as top loading, bottom dispensing product, it reduces the
chance of debris, dust, or contaminants being exposed to the product
inside. Constructed of durable White ABS Plastic. Keyholes for the wall. Face Masks not included.
Made in U.S.A.
|
Bowman FM404-0220 Locking Face Mask Dispenser holds four boxes of
ear-loop masks in bulk. It features a locking lid with a pivot hinges.
Designed as top loading, bottom dispensing product, it reduces the
chance of debris, dust, or contaminants being exposed to the product
inside. Constructed of durable Black ABS Plastic. Keyholes for the wall. Face Masks not included.
Made in U.S.A.
|
Bowman BP-011 Bulk Dispenser - Tall Single Bin holds a variety of
protective apparel in bulk. Single compartment with a hinged lid.
Keyholes for wall mounting. Clear PETG plastic. Safety products not
included. Made in U.S.A.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SCS D271020-Dri-Shield 2700 Series Moisture Barrier Bag 10"x20" 100/PK 7mil thick is designed for moisture and electrostatic discharge (ESD)
sensitive items (such as SMT). Provides physical protection for
contents. These bags do not have a set life span. For best results, bag
inventory should be continually replenished. Many sizes to choose from.
|
Bowman FM403-0220 Locking Face Mask Dispenser holds four boxes of
ear-loop masks in bulk. It features a locking lid with a pivot hinges.
Designed as top loading, bottom dispensing product, it reduces the
chance of debris, dust, or contaminants being exposed to the product
inside. Constructed of durable Black ABS Plastic. Keyholes for the wall. Face Masks not included.
Made in U.S.A.
|
Bowman FM403-0213 Locking Face Mask Dispenser holds four boxes of
ear-loop masks in bulk. It features a locking lid with a pivot hinges.
Designed as top loading, bottom dispensing product, it reduces the
chance of debris, dust, or contaminants being exposed to the product
inside. Constructed of durable White ABS Plastic. Keyholes for the wall. Face Masks not included.
Made in U.S.A.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bowman FM403-0212 Locking Face Mask Dispenser holds four boxes of
ear-loop masks in bulk. It features a locking lid with a pivot hinges.
Designed as top loading, bottom dispensing product, it reduces the
chance of debris, dust, or contaminants being exposed to the product
inside. Constructed of durable Quartz Beige ABS Plastic. Keyholes for the wall. Face Masks not included. Made in U.S.A.
|
Bowman FM403-0111 Locking Face Mask Dispenser holds four boxes of
ear-loop masks in bulk. It features a locking lid with a pivot hinges.
Designed as top loading, bottom dispensing product, it reduces the
chance of debris, dust, or contaminants being exposed to the product
inside. Constructed of durable Clear PETG ABS Plastic. Keyholes for the wall. Face Masks not included.
Made in U.S.A.
|
MTI Mask-03W Enclosed Ear Loops White Face Mask. Available In Blue Or White.Latex Free. Egronomic face mask solutions. Silicon free and non-particulating. Hypoallergenic-soft surface layers prevent skin irritation and allergy problems. 50 per bag 20/CS
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bowman FM002-0212 Combo holds one box of earloop masks, one box of shield masks, and two
boxes of N95 flat masks. This dispenser can also be used as a protective
Wear Organizer holding one box of earloop masks, one box of gowns,
aprons, or jumpsuits/coveralls, and two boxes of gloves. The dispenser
includes two-way keyholes for vertical or horizontal wall mounting in
Quartz Beige ABS Plastic. Safety products not included. Made in the USA.
|
Bowman FM403-0213 Locking Face Mask Dispenser holds four boxes of
ear-loop masks in bulk. It features a locking lid with a pivot hinges.
Designed as top loading, bottom dispensing product, it reduces the
chance of debris, dust, or contaminants being exposed to the product
inside. Constructed of durable Cherry Fauxwood ABS Plastic. Keyholes for the wall. Face Masks not included.
Made in U.S.A.
|
Bowman FM404-0233 Locking Face Mask Dispenser holds four boxes of
ear-loop masks in bulk. It features a locking lid with a pivot hinges.
Designed as top loading, bottom dispensing product, it reduces the
chance of debris, dust, or contaminants being exposed to the product
inside. Constructed of durable Cherry Fauxwood ABS Plastic. Keyholes for the wall. Face Masks not included.
Made in U.S.A.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SCS D371518-Dri-Shield 3700 Series Moisture Barrier Bag 15"x18" 100/PK
4mil thick is designed for moisture and electrostatic discharge (ESD)
sensitive items (such as SMT). Provides physical protection for
contents. These bags do not have a set life span. For best results, bag
inventory should be continually replenished. This item is built to
order. Orders will be accepted for a minimum of 10. Many sizes to choose from.
|
SCS 3371418 Moisture Barrier Bag 3370 Series 14"x18" 100/PK 3.6mil thick is designed for moisture and electrostatic discharge (ESD)
sensitive items (such as SMT). Provides physical protection for
contents. These bags do not have a set life span. For best results, bag
inventory should be continually replenished. This item is built to
order. Orders will be accepted for a minimum of 10. Many sizes to choose from.
|
SCS D30729-Dri-Shield 3000 Series Moisture Barrier Bag 7"x29" 100/PK 6mil thick is designed for moisture and electrostatic discharge (ESD)
sensitive items (such as SMT). Provides physical protection for
contents. These bags do not have a set life span. For best results, bag
inventory should be continually replenished. This item is built to
order. Orders will be accepted for a minimum of 10. Many sizes to choose from.
|
|
|
