|
|
|
|
|
|
|
|
|
|
|
Transforming Technologies WB1637 Single Wire Wrist Strap Set 6' Coil
Cord is the most versatile and cost-effective band set offered by
Transforming
Technologies. The soft, blue woven fabric and 360 degree curved buckle
of the
wrist band allows the skin to breathe and makes it very comfortable to
wear. The band uses hypoallergenic silver-plated nylon thread for
conductivity and has a maximum resistance of 160 ohms. ****Sold in
multiples of 10****
|
Transforming Technologies WB1643 Single Wire Wrist Strap Set 12' Coil
Cord is the most versatile and cost-effective band set offered by
Transforming
Technologies. The soft, blue woven fabric and 360 degree curved buckle
of the
wrist band allows the skin to breathe and makes it very comfortable to
wear. The band uses hypoallergenic silver-plated nylon thread for
conductivity and has a maximum resistance of 160 ohms. ****Sold in
multiples of 10****
|
Transforming Technologies WB0070 Dual Conductor Fabric Wrist Strap Band Only is an one size fits all wrist strap with a reliable path to ground. The wrist strap features a silver plated. monofilament, continuous thread woven together with elastic nylon for full conductivity and comfort..
|
|
|
|
|
|
|
|
|
|
|
|
|
Transforming Technologies WB0050 Dual Conductor Metal Wrist Strap Band Only is an expandable wrist strap with a reliable path to ground. The Speidel metal band features two 180 degree conductive paths around the wrist, providing maximum skin contact.
|
Transforming Technologies WB2695P5 Dual Conductor Fabric Wrist Strap Set 5' Coil Cord with a 1 Meg Ohm resistor features two 180 degree conductive paths around the wrist, providing maximum skin contact and two 4mm male standard snaps. The polyurethane coil insulation and strain relief molding offers excellent coil memory and endurance.
|
Transforming Technologies WB2695P10 Dual Conductor Fabric Wrist Strap Set 10' Coil Cord with a 1 Meg Ohm resistor features two 180 degree conductive paths around the wrist, providing maximum skin contact and two 4mm male standard snaps. The polyurethane coil insulation and strain relief molding offers excellent coil memory and endurance.
|
|
|
|
|
|
|
|
|
|
|
|
|
Transforming Technologies WB7050 Dual Conductor Fabric Wrist Strap Set 5' Coil Cord with a 1 Meg Ohm resistor is an one size fits all wrist strap with a reliable path to ground. The wrist strap features a silver plated. monofilament, continuous thread woven together with elastic nylon for full conductivity and comfort..
|
Transforming Technologies WB7100 Dual Conductor Fabric Wrist Strap Set 10' Coil Cord with a 1 Meg Ohm resistor is an one size fits all wrist strap with a reliable path to ground. The wrist strap features a silver plated. monofilament, continuous thread woven together with elastic nylon for full conductivity and comfort. Minimum buy-10 pieces.
|
Transforming Technologies WB7200 Dual Conductor Fabric Wrist Strap Set 20' Coil Cord with a 1 Meg Ohm resistor is an one size fits all wrist strap with a reliable path to ground. The wrist strap features a silver plated. monofilament, continuous thread woven together with elastic nylon for full conductivity and comfort. Minimum buy-10 pieces.
|
|
|
|
|
|
|
|
|
|
|
|
|
Transforming Technologies WB2695P20 Dual Conductor Fabric Wrist Strap Set 20' Coil Cord with a 1 Meg Ohm resistor features two 180 degree conductive paths around the wrist, providing maximum skin contact and two 4mm male standard snaps. The polyurethane coil insulation and strain relief molding offers excellent coil memory and endurance.
|
Transforming Technologies WB5050 Dual Conductor Metal Wrist Strap Set 5' Coil Cord with a 1 Meg Ohm resistor is an expandable wrist strap with a reliable path to ground. The Speidel metal band features two 180 degree conductive paths around the wrist, providing maximum skin contact.
|
SCS 2369 Wrist Strap Adjustable, Dual Conductor, Fabric Wrist Strap w/5' Coil Cord set is available in one size
that adjusts to almost any size wrist to provide reliable protection.
The wristband provides full conductivity, comfort and reliability,
while ensuring continuous drain of static charge when used with
SCS 2300 Dual-Wire Coil Cord. Made to be used in conjunction with all SCS dual-wire workstation monitors. Made in the USA.
|
|
|
|
|
|
|
|
|
|
|
|
|
Botron B9201 One Operator Continuous Monitor is designed to monitor resistance of the operators path to ground. It comes with a built in audible alarm and LED, tiggering then the operator falls out of spec, becomes disconnected, or ground is lost. It is a fixed resistor system and is go no go, no calibration is needed.
|
The Ground Gard 4.5 is a wrist strap and ground monitoring device for the electronics work station. Used correctly it will provide a "static safe and properly grounded" work environment. It is designed to constantly monitor 2 capacitance type single wire wrist straps using a remote module for each user.
|
Transforming Technologies WB5100 Dual Conductor Metal Wrist Strap Set 10' Coil Cord with a 1 Meg Ohm resistor is an expandable wrist strap with a reliable path to ground. The Speidel metal band features two 180 degree conductive paths around the wrist, providing maximum skin contact.
|
|
|
|
|
|
|
|
|
|
|
|
|
SCS 2381 Dual-Wire Small Wrist Strap with 5' Coil Cord is a premium metal
expansion wrist strap with more reliable path-to-ground. Very
comfortable, designed not to pull or pinch hair. Long wearing and easy
to clean. One Megohm resistor located at socket. Made to be used in
conjunction with all SCS dual-wire workstation monitors. Made in the
USA.
|
SCS 2382 Dual-Wire Medium Wrist Strap with 5' Coil Cord is a premium metal
expansion wrist strap with more reliable path-to-ground. Very
comfortable, designed not to pull or pinch hair. Long wearing and easy
to clean. One Megohm resistor located at socket. Made to be used in
conjunction with all SCS dual-wire workstation monitors. Made in the
USA.
|
Transforming Technologies WB5200 Dual Conductor Metal Wrist Strap Set 20' Coil Cord with a 1 Meg Ohm resistor is an expandable wrist strap with a reliable path to ground. The Speidel metal band features two 180 degree conductive paths around the wrist, providing maximum skin contact.
|
|
|
|
|
|
|
|
|
|
|
|
|
SCS 2383 Dual-Wire Large Wrist Strap with 5' Coil Cord is a premium metal
expansion wrist strap with more reliable path-to-ground. Very
comfortable, designed not to pull or pinch hair. Long wearing and easy
to clean. One Megohm resistor located at socket. Made to be used in
conjunction with all SCS dual-wire workstation monitors. Made in the
USA.
|
Botron B9203TB Continuous Monitor Test Box verifies single wire monitors. For use with the B9201, B9202, and B9203.
|
SCS 770069 Power Relay for WS Aware Monitor is a controlled power strip
with 4 outlets (2 normally off, 1 normally on, 1 always on). Controls
power to workbenches, hand tools, and other electronic devices dependent
on the WS aware monitor's status. Eliminates shock hazard, prevents
relay chatter, and extends contact life. .
|
|
|
|
|
|
|
|
|
|
|
|
|
Botron B9202 Continuous Monitor is designed to monitor resistance of both the work surface and the operator. It comes with a built in audible alarm and LED, triggering either the operator of work surface when it falls out of spec, becomes disconnected, or the ground is lost. It is a fixed resistor system, go or no go, no calibration needed.
|
Botron B9203 Two Operator Continuous Monitor is designed to monitor resistance of both the work surface and the operators. It comes with a built in audible alarm and LED triggering when either the operator or work surface falls out of spec, becomes disconnected, or ground is lost. It is a fixed resistor system and is go no go, no calibration is needed.
|
Transforming Technologies CM1601 RangerOne Dual Wire Constant Monitor accurately meausres the electrical resistance of an ESD wrist band. Audible and visible alarms are triggered if the operators resistance exceeds 35 meg Ohms. The RangerOne series saves time by eliminating the time consuming testing of wrist straps and coil cords.
|
|
|
|
|
|
|
|
|
|
|
|
|
Botron B920724 Dual wire Continuous Monitor is designed to monitor resistance of both the work surface and the operator. It comes with a built in audible alarm and LED, triggering either the operator of work surface when it falls out of spec, becomes disconnected, or the ground is lost. It is a fixed resistor system, go or no go, no calibration needed.
|
Transforming Technologies CM1602 RangerOne Dual Wire Constant Monitor accurately meausres the electrical resistance of an ESD wrist band and work station. Audible and visible alarms are triggered if the operators resistance exceeds 35 meg Ohms. The RangerOne series saves time by eliminating the time consuming testing of wrist straps and coil cords.
|
Desco 19651 Multi-Mount Continuous Monitor. Continuously
monitors the path-to-ground integrity of one operator and one ESD
worksurface. Alarms when the operator unintentionally disconnects from
the monitor or the connection between the banana plug and the monitor's
jack is intermittent.
|
|
|
|
|
|
|
|
|
|
|
|
|
Botron B92500 GEM GroundHog Continuous Monitor confirms the integrity of the resistance path from common ground point to electrical ground using up to 22 verified ground points. Tri-color LED illuminates to show pass, fail, and park. With both an audible alarm and large LED indicator, identifying problems at the point of ground has never been more fool proof.
|
SCS CTC331-W Iron Man Plus Dual-Wire Monitor continuously
monitors the path-to-ground integrity and body voltage
of two operators, as well as the path-to-ground integrity
for one conductive or dissipative worksurface. Monitors a voltage level
that is being generated on a
printed circuit board while working on it. Monitors resistance to ground
of a conductive or
dissipative static control type of worksurface. Monitors resistance and
voltage on a dual conductor wrist strap while being worn by a person.
|
SCS 724 provides instant notification when a wrist strap malfunctions or when it is being worn improperly. Model 724 continuously pulses a signal which is returned to the monitor through a special wrist strap and cord that contains two separate sets of independent conductors. Designed to monitor the operation of the wrist strap grounding systems of two operators by using a DC current source to measure a loop electrical resistance. The monitor makes a resistance measurement by passing a very small pulsed signal down one conductor in the cord into one side of the wrist band, from the band through the skin of the wearer, back into the second side of the wrist band, and back down the second conductor in the cord to the monitor. Switches located on the side of the monitor allows for selection of test voltages (9v or 16v) and resistance limits (10 or 35 megohms).
|
|
|
|
|
|
|
|
|
|
|
|
|
Transforming Technologies CM1600 RangerPro Dual Wire Constant Monitor accurately measures the electrical resistance of two ESD wrist bands, two auxiliary grounds, and two work stations. Audible and visible alarms are triggered if the operators resistance exceeds 35 meg Ohms. One device can monitor your entire work station.
|
Transforming Technologies TTB2A-23RB 24"x36" Royal Blue Table Mat,
CM1602 Ranger Two Dual Monitor, WB7050 Dual Wrist Strap Set, and Grounding Hardware is a complete ESD Workstation Kit.
Monitors One Dual Wire Wrist Strap, and One Work Surface. Two Layer
Rubber has excellent Resistance to Hold Solders, Soldering Irons and
Most Solvents. Includes Grounding Hardware and Wrist Strap. Kit Meets
or Exceeds Requirements of ANSI/ESD S20.20. Available in Royal Blue,
Light Blue, Gray, and Green.
|
Desco 19330 Full-Time Monitor with North American Power Cord continuously
monitors the path-to-ground integrity of one operator, one ESD
worksurface, and the electrical ground used to by the monitor. Single workstation continuous monitor. Provides a verified ground point for mats, carts, tools, and other items.
|
|
|
|
|
|
|
|
|
|
|
|
|
Transforming Technologies TTB2A-24RB 24"x48" Royal Blue Table Mat,
CM1602 Ranger Two Dual Monitor, WB7050 Dual Wrist Strap Set, and Grounding Hardware is a complete ESD Workstation Kit.
Monitors One Dual Wire Wrist Strap, and One Work Surface. Two Layer
Rubber has excellent Resistance to Hold Solders, Soldering Irons and
Most Solvents. Includes Grounding Hardware and Wrist Strap. Kit Meets
or Exceeds Requirements of ANSI/ESD S20.20. Available in Royal Blue,
Light Blue, Gray, and Green.
|
SCS 770734 Verification Monitor for 724 Plus Monitors checks the test
limits of the SCS 770724 724 Plus Workstation Monitor without removing
it from the workstation. NIST Calibrated and certificate is included.
Made in the USA.
|
Transforming Technologies CM2815 RangerNet Dual Wire Constant Monitor accurately measures the electrical resistance of two ESD wrist bands, two auxiliary grounds, and two work stations. Data logging capabilities. Audible and visible alarms are triggered if the operators resistance exceeds 35 meg Ohms. One device can monitor your entire work station.
|
|
|
|
|
|
|
|
|
|
|
|
|
Desco 19668 Zero Volt Monitor continuously
monitors the path-to-ground integrity of two operators and two ESD
worksurfaces independently. Dual station continuous monitor for 2
operators and 2 workstations. Places dual test signals onto each of the
dual-wire wrist strap's conductors to negate finger-tip voltage and the
risk of electrical overstress for the handling of sensitive components.
|
Botron's B65240 Dissipative Two Layer Rubber Roll 2'x40' .080 thick. Dissipative top layer 10e8. Conductive bottom layer 10e4. It is reversible and will not burn and supports the use of constant monitors. 50' long rolls are available in 2', 30", 3', and 4' wide widths. Blue, Gray, and Lead Free Green.
|
Transforming Technologies CM2800 RangerBoss Dual Wire Constant Monitor accurately measures the electrical resistance of two ESD wrist bands, two auxiliary grounds, and two work stations.Network ready with data logging capabilities. Audible and visible alarms are triggered if the operators resistance exceeds 35 meg Ohms. One device can monitor your entire work station. Adjustable alarm limits.
|
|
|
|
|
|
|
|
|
|
|
|
|
Botron B92700 OMNIGRD Elite Multi-Ground Continuous Monitoring System with a rich feature set never before available, ESD facilities and sensitive component manufactures can monitor critical grounds in real time in applications ranging from the benchtop to capital equipment.Configurable to send email alerts on port status and power status.
|
Botron's B61250 Dissipative Two Layer Rubber Roll 2'x50' .060 thick. Dissipative top layer 10e8. Conductive bottom layer 10e4. It is reversible and will not burn and supports the use of constant monitors. 50' long rolls are available in 2', 30", 3', and 4' wide widths. Blue, Gray, and Lead Free Green.
|
Botron's B653040 Dissipative Two Layer Rubber Roll 30"x40' .080 thick. Dissipative top layer 10e8. Conductive bottom layer 10e4. It is reversible and will not burn and supports the use of constant monitors. 50' long rolls are available in 2', 30", 3', and 4' wide widths. Blue, Gray, and Lead Free Green.
|
|
|
|
|
|
|
|
|
|
|
|
|
Botron's B31250 Dissipative Three Layer Rubber Roll 2'x50' .060 thick. Dissipative top layer 10e8. Conductive bottom layer 10e4. It is reversible and will not burn and supports the use of constant monitors. 50' long rolls are available in 2', 30", 3', and 4' wide widths. Blue, Gray, and Lead Free Green.
|
Botron's B613050 Dissipative Two Layer Rubber Roll 30"x50' .060 thick. Dissipative top layer 10e8. Conductive bottom layer 10e4. It is reversible and will not burn and supports the use of constant monitors. 50' long rolls are available in 2', 30", 3', and 4' wide widths. Blue, Gray, and Lead Free Green.
|
Botron's B65340 Dissipative Two Layer Rubber Roll 3'x40' .080 thick. Dissipative top layer 10e8. Conductive bottom layer 10e4. It is reversible and will not burn and supports the use of constant monitors. 50' long rolls are available in 2', 30", 3', and 4' wide widths. Blue, Gray, and Lead Free Green.
|
|
|
|
|
|
|
|
|
|
|
|
|
Botron B92900 Elite Sentinel Continuous Monitoring System Dual Operator. Total path to ground measurement is the apex of wrist strap constant monitoring. In contrast, resistance loop monitoring ignores the most vital part of and ESD program, total resistance of a system. The Sentinel V2 measures the ESD device and the human body down a 2 connector path to ground. This circuit differs from resistance loop monitoring in which the measurement is calculated with device resistors in a parallel path, halving the resistance for a truer more accurate reading.
|
Botron's B61350 Dissipative Two Layer Rubber Roll 3'x50' .060 thick. Dissipative top layer 10e8. Conductive bottom layer 10e4. It is reversible and will not burn and supports the use of constant monitors. 50' long rolls are available in 2', 30", 3', and 4' wide widths. Blue, Gray, and Lead Free Green.
|
Botron's B313050 Dissipative Three Layer Rubber Roll 30"x50' .060 thick. Dissipative top layer 10e8. Conductive bottom layer 10e4. It is reversible and will not burn and supports the use of constant monitors. 50' long rolls are available in 2', 30", 3', and 4' wide widths. Blue, Gray, and Lead Free Green.
|
|
|
|
|
|
|
|
|
|
|
|
|
Botron's B65440 Dissipative Two Layer Rubber Roll 4'x40' .080 thick. Dissipative top layer 10e8. Conductive bottom layer 10e4. It is reversible and will not burn and supports the use of constant monitors. 50' long rolls are available in 2', 30", 3', and 4' wide widths. Blue, Gray, and Lead Free Green.
|
Botron's B31350 Dissipative Three Layer Rubber Roll 3'x50' .060 thick. Dissipative top layer 10e8. Conductive bottom layer 10e4. It is reversible and will not burn and supports the use of constant monitors. 50' long rolls are available in 2', 30", 3', and 4' wide widths. Blue, Gray, and Lead Free Green.
|
Botron's B61450 Dissipative Two Layer Rubber Roll 4'x50' .060 thick. Dissipative top layer 10e8. Conductive bottom layer 10e4. It is reversible and will not burn and supports the use of constant monitors. 50' long rolls are available in 2', 30", 3', and 4' wide widths. Blue, Gray, and Lead Free Green.
|
|
|
|
|
|
|
|
|
Botron's B31450 Dissipative Three Layer Rubber Roll 4'x50' .060 thick. Dissipative top layer 10e8. Conductive bottom layer 10e4. It is reversible and will not burn and supports the use of constant monitors. 50' long rolls are available in 2', 30", 3', and 4' wide widths. Blue, Gray, and Lead Free Green.
|
|