|
|
|
|
|
|
|
|
|
|
|
SCS 13001014 1300 Series Metal-In Static Shield Bag 10x14 is a
transparent metal-in static shielding bag is designed to provide a
static safe environment for ESD sensitive electronic devices. A stronger
polyester layer helps prevent punctures. Bags are printed with an ESD
protective symbol and a lot code for traceability. The bags are heat
sealable. ZipTop and other custom features are available. For best
results, bag inventory should be continually replenished. Sold in packs
of 100. Made in the USA.
|
SCS 13001115 1300 Series Metal-In Static Shield Bag 11x15 is a
transparent metal-in static shielding bag is designed to provide a
static safe environment for ESD sensitive electronic devices. A stronger
polyester layer helps prevent punctures. Bags are printed with an ESD
protective symbol and a lot code for traceability. The bags are heat
sealable. ZipTop and other custom features are available. For best
results, bag inventory should be continually replenished. Sold in packs
of 100. Made in the USA.
|
SCS 13001318 1300 Series Metal-In Static Shield Bag 13x18 is a
transparent metal-in static shielding bag is designed to provide a
static safe environment for ESD sensitive electronic devices. A stronger
polyester layer helps prevent punctures. Bags are printed with an ESD
protective symbol and a lot code for traceability. The bags are heat
sealable. ZipTop and other custom features are available. For best
results, bag inventory should be continually replenished. Sold in packs
of 100. ***10 pack min.*** Made in the USA.
|
|
|
|
|
|
|
|
|
|
|
|
|
SCS 13001518 1300 Series Metal-In Static Shield Bag 15x18 is a
transparent metal-in static shielding bag is designed to provide a
static safe environment for ESD sensitive electronic devices. A stronger
polyester layer helps prevent punctures. Bags are printed with an ESD
protective symbol and a lot code for traceability. The bags are heat
sealable. ZipTop and other custom features are available. For best
results, bag inventory should be continually replenished. Sold in packs
of 100. Made in the USA.
|
SCS 130035 1300 Series Metal-In Static Shield Bag 3x5 is a
transparent metal-in static shielding bag is designed to provide a
static safe environment for ESD sensitive electronic devices. A stronger
polyester layer helps prevent punctures. Bags are printed with an ESD
protective symbol and a lot code for traceability. The bags are heat
sealable. ZipTop and other custom features are available. For best
results, bag inventory should be continually replenished. Sold in packs
of 100. Made in the USA.
|
SCS 130058 1300 Series Metal-In Static Shield Bag 5x8 is a
transparent metal-in static shielding bag is designed to provide a
static safe environment for ESD sensitive electronic devices. A stronger
polyester layer helps prevent punctures. Bags are printed with an ESD
protective symbol and a lot code for traceability. The bags are heat
sealable. ZipTop and other custom features are available. For best
results, bag inventory should be continually replenished. Sold in packs
of 100. Made in the USA.
|
|
|
|
|
|
|
|
|
|
|
|
|
SCS 1300610 1300 Series Metal-In Static Shield Bag 6x10 is a
transparent metal-in static shielding bag is designed to provide a
static safe environment for ESD sensitive electronic devices. A stronger
polyester layer helps prevent punctures. Bags are printed with an ESD
protective symbol and a lot code for traceability. The bags are heat
sealable. ZipTop and other custom features are available. For best
results, bag inventory should be continually replenished. Sold in packs
of 100. Made in the USA.
|
SCS 130068 1300 Series Metal-In Static Shield Bag 6x8 is a
transparent metal-in static shielding bag is designed to provide a
static safe environment for ESD sensitive electronic devices. A stronger
polyester layer helps prevent punctures. Bags are printed with an ESD
protective symbol and a lot code for traceability. The bags are heat
sealable. ZipTop and other custom features are available. For best
results, bag inventory should be continually replenished. Sold in packs
of 100. Made in the USA.
|
SCS 1300810 1300 Series Metal-In Static Shield Bag 8x10 is a
transparent metal-in static shielding bag is designed to provide a
static safe environment for ESD sensitive electronic devices. A stronger
polyester layer helps prevent punctures. Bags are printed with an ESD
protective symbol and a lot code for traceability. The bags are heat
sealable. ZipTop and other custom features are available. For best
results, bag inventory should be continually replenished. Sold in packs
of 100. Made in the USA.
|
|
|
|
|
|
|
|
|
|
|
|
|
SCS 1300912 1300 Series Metal-In Static Shield Bag 9x12 is a
transparent metal-in static shielding bag is designed to provide a
static safe environment for ESD sensitive electronic devices. A stronger
polyester layer helps prevent punctures. Bags are printed with an ESD
protective symbol and a lot code for traceability. The bags are heat
sealable. ZipTop and other custom features are available. For best
results, bag inventory should be continually replenished. Sold in packs
of 100. Made in the USA.
|
SCS 1502418 1500 Series Metal-Out Static Shield Bag 24x18 100/PK is a
transparent metal-in static shielding bag is designed to provide a
static safe packaging for the shipment and/or storage of ESD sensitive
items including outside an ESD protected area. Bags are printed with an
ESD
protective symbol and a lot code for traceability. The bags are heat
sealable. ZipTop and other custom styles and sizes are available. For
best results, bag inventory should be continually replenished. This item
is built-to-order. Orders will be accepted for a minimum of 10. Made in the USA.
|
SCS 2369 Wrist Strap Adjustable, Dual Conductor, Fabric Wrist Strap w/5' Coil Cord set is available in one size
that adjusts to almost any size wrist to provide reliable protection.
The wristband provides full conductivity, comfort and reliability,
while ensuring continuous drain of static charge when used with
SCS 2300 Dual-Wire Coil Cord. Made to be used in conjunction with all SCS dual-wire workstation monitors. Made in the USA.
|
|
|
|
|
|
|
|
|
|
|
|
|
SCS 2381 Dual-Wire Small Wrist Strap with 5' Coil Cord is a premium metal
expansion wrist strap with more reliable path-to-ground. Very
comfortable, designed not to pull or pinch hair. Long wearing and easy
to clean. One Megohm resistor located at socket. Made to be used in
conjunction with all SCS dual-wire workstation monitors. Made in the
USA.
|
SCS 2382 Dual-Wire Medium Wrist Strap with 5' Coil Cord is a premium metal
expansion wrist strap with more reliable path-to-ground. Very
comfortable, designed not to pull or pinch hair. Long wearing and easy
to clean. One Megohm resistor located at socket. Made to be used in
conjunction with all SCS dual-wire workstation monitors. Made in the
USA.
|
SCS 2383 Dual-Wire Large Wrist Strap with 5' Coil Cord is a premium metal
expansion wrist strap with more reliable path-to-ground. Very
comfortable, designed not to pull or pinch hair. Long wearing and easy
to clean. One Megohm resistor located at socket. Made to be used in
conjunction with all SCS dual-wire workstation monitors. Made in the
USA.
|
|
|
|
|
|
|
|
|
|
|
|
|
SCS 3371418 Moisture Barrier Bag 3370 Series 14"x18" 100/PK 3.6mil thick is designed for moisture and electrostatic discharge (ESD)
sensitive items (such as SMT). Provides physical protection for
contents. These bags do not have a set life span. For best results, bag
inventory should be continually replenished. This item is built to
order. Orders will be accepted for a minimum of 10. Many sizes to choose from.
|
SCS 3HIC125 Humidity Card 3-Spot measures the level of relative humidity
that the contents of the packaging have been exposed to .An integral
part of a complete moisture barrier
packaging assembly is the Humidity Indicator Card.
High relative humidity can cause significant, possibly
irreparable damage to sensitive equipment, supplies,and products. (30%-40%-50%)
125/Can.
|
SCS 497AJH Vacuum, HEPA. 120VAC is ESD safe and ideal for removing toner and dust or cleaning data processing equipment. It is portable and has a quick set-up. Detachable power cord for easy storage. Made in the USA.
|
|
|
|
|
|
|
|
|
|
|
|
|
SCS 51015HIC125-CF Humidity Card 3-Spot measures the level of relative humidity
that the contents of the packaging have been exposed to .An integral
part of a complete moisture barrier
packaging assembly is the Humidity Indicator Card.
High relative humidity can cause significant, possibly
irreparable damage to sensitive equipment, supplies,and products. (5-10-15%)
125/Can.
|
SCS 51060HIC125-CF Humidity Card 3-Spot measures the level of relative humidity
that the contents of the packaging have been exposed to .An integral
part of a complete moisture barrier
packaging assembly is the Humidity Indicator Card.
High relative humidity can cause significant, possibly
irreparable damage to sensitive equipment, supplies,and products. (5-10-60%)
125/Can.
|
SCS 7001518-Dri-Shield 2000 Series Moisture Barrier Bag 15"x18" 100/PK 3.6mil thick is designed for moisture and electrostatic discharge (ESD)
sensitive items (such as SMT). Provides physical protection for
contents. These bags do not have a set life span. For best results, bag
inventory should be continually replenished. Many sizes to choose from.
|
|
|
|
|
|
|
|
|
|
|
|
|
SCS 724 provides instant notification when a wrist strap malfunctions or when it is being worn improperly. Model 724 continuously pulses a signal which is returned to the monitor through a special wrist strap and cord that contains two separate sets of independent conductors. Designed to monitor the operation of the wrist strap grounding systems of two operators by using a DC current source to measure a loop electrical resistance. The monitor makes a resistance measurement by passing a very small pulsed signal down one conductor in the cord into one side of the wrist band, from the band through the skin of the wearer, back into the second side of the wrist band, and back down the second conductor in the cord to the monitor. Switches located on the side of the monitor allows for selection of test voltages (9v or 16v) and resistance limits (10 or 35 megohms).
|
SCS 770030 Combo Wrist Strap and Footwear Tester verifies the
functionally of an operator's wrist strap and footwear (footwear test
requires foot plate). It determines if an operator's wrist strap and
footwear will function correctly. A rocker switch allows the operator to
select a wrist strap or footwear test. Can also be used to test smocks
or garments that feature a grounding mechanism for operators using a
coiled cord connection. Uses 9V battery and has visual and audible alarms.
|
SCS 770032 Foot Plate and Stand for Combo Wrist Strap and Footwear
Tester allows tester to remain portable and be used in different ares of
the ESD protected area if needed. Tester (770030) sold separately.
Made in the USA.
|
|
|
|
|
|
|
|
|
|
|
|
|
SCS 770043 Multi-Ground Hub is a grounding point for wrist straps,
ground cords, tools and other items. Connect to other grounding hubs for
additional grounding points. Mounting hardware included. Hand tighten
or secure with locking screw and hex wrench.
|
SCS 770069 Power Relay for WS Aware Monitor is a controlled power strip
with 4 outlets (2 normally off, 1 normally on, 1 always on). Controls
power to workbenches, hand tools, and other electronic devices dependent
on the WS aware monitor's status. Eliminates shock hazard, prevents
relay chatter, and extends contact life. .
|
SCS 770071 30" x 50' Light Blue 2-Layer R3 Dissipative Rubber Worksurface Roll provides a
worksurface that does not generate a static charge and will control the
discharge rate from all conductors (including ESD susceptible items)
that are placed on the surface.
|
|
|
|
|
|
|
|
|
|
|
|
|
SCS 770078 18" x 50' Dark Blue 2-Layer R3 Dissipative Rubber Worksurface Roll provides a
worksurface that does not generate a static charge and will control the
discharge rate from all conductors (including ESD susceptible items)
that are placed on the surface.
|
SCS 770081 24" x 50' Green 2-Layer R3 Dissipative Rubber Worksurface Roll provides a
worksurface that does not generate a static charge and will control the
discharge rate from all conductors (including ESD susceptible items)
that are placed on the surface.
|
SCS 770088 36" x 50' Gray 2-Layer R3 Dissipative Rubber Worksurface Roll provides a
worksurface that does not generate a static charge and will control the
discharge rate from all conductors (including ESD susceptible items)
that are placed on the surface.
|
|
|
|
|
|
|
|
|
|
|
|
|
SCS 770734 Verification Monitor for 724 Plus Monitors checks the test
limits of the SCS 770724 724 Plus Workstation Monitor without removing
it from the workstation. NIST Calibrated and certificate is included.
Made in the USA.
|
SCS
770770 24" x 40' Light Blue 2-Layer R7 Dissipative Rubber Worksurface
Roll provides a worksurface that is low outgassing and low VOC. Reduces
contamination in cleanrooms and other sensitive environments. Provides a
worksurface that does not generate a static charge and will control the
discharge rate from all conductors (including ESD susceptible items)
that are placed on the surface.
|
SCS 8004 Charge Guard ESD Surface and Mat Cleaner 25 Wipes removes dust, grease, grime, fingerprints, solder flux and other contaminants from ESD mats and other surfaces. Alcohol-free formula. Excessive
use of alcohol-based cleaners may dry-out mats (vinyl or rubber) and
degrade performance. Non-Hazardous, non-flammable green chemistry
formula. Packaged in Dri-Shield 2000 series moisture barrier pouch.
|
|
|
|
|
|
|
|
|
|
|
|
|
SCS 817R Static Shield Film 60"x3000' is manufactured from four
layers-static dissipative coating, polyester, metal and polyethylene
laminate. The polyester dielectric in concert with the metal layer
provides discharge shielding. The exterior is static dissipative and
allows electrostatic charges to be removed when grounded. This product
is BTO. Minimum quantity 2. Made in the USA.
|
SCS 817R-60"x6000' Static Shield Film 60"x6000' is manufactured from four
layers-static dissipative coating, polyester, metal and polyethylene
laminate. The polyester dielectric in concert with the metal layer
provides discharge shielding. The exterior is static dissipative and
allows electrostatic charges to be removed when grounded. This product
is BTO. Made in the USA.
|
SCS 8214-24X48KT 3-Layer Vinyl Mat Kit, Blue 0.140" X 24" X 48"
Dissipative Mats and Rolls are soft table mats with 3-layer construction
that meet ANSI/ESD S2020 tested per work surface standard. The top
color layer is durable static dissipative vinyl which has sufficiently
low resistance to discharge static-laden conductors, yet will help
prevent the shorting of pins on the back of printed circuit boards laid
on the mat. The middle layer is a highly-conductive scrim that provides
the main discharge path to ground, and the bottom layer is
static-dissipative foam, providing a durable non-skid cushion. Includes
Wrist strap grounding system and single snap fastener. Compatible with
Constant Monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
SCS CTC331-W Iron Man Plus Dual-Wire Monitor continuously
monitors the path-to-ground integrity and body voltage
of two operators, as well as the path-to-ground integrity
for one conductive or dissipative worksurface. Monitors a voltage level
that is being generated on a
printed circuit board while working on it. Monitors resistance to ground
of a conductive or
dissipative static control type of worksurface. Monitors resistance and
voltage on a dual conductor wrist strap while being worn by a person.
|
SCS CTM048-21 EM Eye-ESD Event Meter is capable of providing measurements for many various parameters, which are determined by the type of sensor connected to the EM Eye Meter. The portable, easy to use EM Eye Meter serves as a measuring instrument for most ESD signals and measures the magnitude of ESD events. The EM Eye Meter with the modular construction concept can expand to different applications. With the current design, it measures the magnitude of most ESD events when in one of its filter modes, electromagnetic fields (EMF), power density, effective isotropic ally radiated power and RF.
|
SCS CTM051 Ground Pro Meter is a comprehensive instrument that measures the ground connection of your equipment in accordance with Grounding standard ANSI/ESD S6.1 and ANSI/ESD S20.20. In addition to measuring ground impedance, it also measures AC and DC voltage on the ground as well as the presence of high-frequency noise or electromagnetic interference (EMI) on the ground, alerting you to possible functionality problems, such as tool lock-ups, erratic behavior, and parametric errors.
|
|
|
|
|
|
|
|
|
|
|
|
|
SCS D271020-Dri-Shield 2700 Series Moisture Barrier Bag 10"x20" 100/PK 7mil thick is designed for moisture and electrostatic discharge (ESD)
sensitive items (such as SMT). Provides physical protection for
contents. These bags do not have a set life span. For best results, bag
inventory should be continually replenished. Many sizes to choose from.
|
SCS D302.66.1-Dri-Shield 3000 Series Moisture Barrier Bag 2x6" x 6.1" 100/PK 6mil thick is designed for moisture and electrostatic discharge (ESD)
sensitive items (such as SMT). Provides physical protection for
contents. These bags do not have a set life span. For best results, bag
inventory should be continually replenished. This item is built to
order. Orders will be accepted for a minimum of 25. Many sizes to choose from.
|
SCS D30424-Dri-Shield 3000 Series Moisture Barrier Bag 4"x24" 100/PK 6mil thick is designed for moisture and electrostatic discharge (ESD)
sensitive items (such as SMT). Provides physical protection for
contents. These bags do not have a set life span. For best results, bag
inventory should be continually replenished. This item is built to
order. Orders will be accepted for a minimum of 10. Many sizes to choose from.
|
|
|
|
|
|
|
|
|
|
|
|
|
SCS D30729-Dri-Shield 3000 Series Moisture Barrier Bag 7"x29" 100/PK 6mil thick is designed for moisture and electrostatic discharge (ESD)
sensitive items (such as SMT). Provides physical protection for
contents. These bags do not have a set life span. For best results, bag
inventory should be continually replenished. This item is built to
order. Orders will be accepted for a minimum of 10. Many sizes to choose from.
|
SCS D343.55.5-Dri-Shield 3400 Series Moisture Barrier Bag 3x5" x 5.5" 100/PK
4mil thick is designed for moisture and electrostatic discharge (ESD)
sensitive items (such as SMT). Provides physical protection for
contents. These bags do not have a set life span. For best results, bag
inventory should be continually replenished. This item is built to
order. Orders will be accepted for a minimum of 40. Many sizes to choose from.
|
SCS D371518-Dri-Shield 3700 Series Moisture Barrier Bag 15"x18" 100/PK
4mil thick is designed for moisture and electrostatic discharge (ESD)
sensitive items (such as SMT). Provides physical protection for
contents. These bags do not have a set life span. For best results, bag
inventory should be continually replenished. This item is built to
order. Orders will be accepted for a minimum of 10. Many sizes to choose from.
|
|
|
|
|
|
|
|
|
|
|
|
|
SCS NCA006 Replacement Test Leads for Ground Pro Meter 1 Pair. SCS CTM051 Ground Pro Meter is a comprehensive instrument that measures the ground connection of your equipment in accordance with Grounding standard ANSI/ESD S6.1 and ANSI/ESD S20.20. In addition to measuring ground impedance, it also measures AC and DC voltage on the ground as well as the presence of high-frequency noise or electromagnetic interference (EMI) on the ground, alerting you to possible functionality problems, such as tool lock-ups, erratic behavior, and parametric errors.
|
SCS PCL1001012-PCL-100 Clean Series Metal-In Static Shield Bag 10x12
100/PK are designed for ESD packaging for use in cleanroom areas where
surface particulate is of concern. Protects ESD sensitive contents from
electrostatic fields and electrostatic discharges. (ESD) For best
results, bag inventory should be continually replenished. Sold in packs
of 100. Made in the USA.
|
SCS PCL1001115-PCL-100 Clean Series Metal-In Static Shield Bag 11x15 100/PK are designed for ESD packaging for use in cleanroom areas where
surface particulate is of concern. Protects ESD sensitive contents from
electrostatic fields and electrostatic discharges. (ESD) For best
results, bag inventory should be continually replenished. Sold in packs
of 100. Made in the USA.
|
|
|
|
|
|
|
|
|
|
|
|
|
SCS PCL1001218-PCL-100 Clean Series Metal-In Static Shield Bag 12x18 100/PK are designed for ESD packaging for use in cleanroom areas where
surface particulate is of concern. Protects ESD sensitive contents from
electrostatic fields and electrostatic discharges. (ESD) For best
results, bag inventory should be continually replenished. Sold in packs
of 100. Made in the USA.
|
SCS PCL1001818-PCL-100 Clean Series Metal-In Static Shield Bag 18x18 100/PK are designed for ESD packaging for use in cleanroom areas where
surface particulate is of concern. Protects ESD sensitive contents from
electrostatic fields and electrostatic discharges. (ESD) For best
results, bag inventory should be continually replenished. Sold in packs
of 100. Made in the USA.
|
SCS PCL1002024-PCL-100 Clean Series Metal-In Static Shield Bag 20x20 100/PK are designed for ESD packaging for use in cleanroom areas where
surface particulate is of concern. Protects ESD sensitive contents from
electrostatic fields and electrostatic discharges. (ESD) For best
results, bag inventory should be continually replenished. Sold in packs
of 100. Made in the USA.
|
|
|
|
|
|
|
|
|
|
|
|
|
SCS PCL10035-PCL-100 Clean Series Metal-In Static Shield Bag 3x5 100/PK are designed for ESD packaging for use in cleanroom areas where
surface particulate is of concern. Protects ESD sensitive contents from
electrostatic fields and electrostatic discharges. (ESD) For best
results, bag inventory should be continually replenished. Sold in packs
of 100. Made in the USA.
|
SCS PCL10046-PCL-100 Clean Series Metal-In Static Shield Bag 4x6 100/PK are designed for ESD packaging for use in cleanroom areas where
surface particulate is of concern. Protects ESD sensitive contents from
electrostatic fields and electrostatic discharges. (ESD) For best
results, bag inventory should be continually replenished. Sold in packs
of 100. Made in the USA.
|
SCS PCL100610-PCL-100 Clean Series Metal-In Static Shield Bag 6x10 100/PK are designed for ESD packaging for use in cleanroom areas where
surface particulate is of concern. Protects ESD sensitive contents from
electrostatic fields and electrostatic discharges. (ESD) For best
results, bag inventory should be continually replenished. Sold in packs
of 100. Made in the USA.
|
|
|
|
|
|
|
|
|
|
|
SCS PCL100810-PCL-100 Clean Series Metal-In Static Shield Bag 8x10 100/PK are designed for ESD packaging for use in cleanroom areas where
surface particulate is of concern. Protects ESD sensitive contents from
electrostatic fields and electrostatic discharges. (ESD) For best
results, bag inventory should be continually replenished. Sold in packs
of 100. Made in the USA.
|
SCS PCL100812-PCL-100 Clean Series Metal-In Static Shield Bag 8x12 100/PK are designed for ESD packaging for use in cleanroom areas where
surface particulate is of concern. Protects ESD sensitive contents from
electrostatic fields and electrostatic discharges. (ESD) For best
results, bag inventory should be continually replenished. Sold in packs
of 100. Made in the USA.
|
|